alright i know smsp makes them but who else makes a true 2.5inch exhaust. interior or exterior diameter and post pictures please.

T1R is 2.5 inch right? thats id or od?

i have pictures of apexi, smsp, T1R, buddyclubspec3, amuse.

had to remake since the mod was not so nice and deleted my previous post and took away some points.

i'm just looking for a 2.5inch exhaust to compliment my soon to be 2.5 collector header in the future.

 

The "new" T1R is 2.5" OD - but A&J has supply problems with the distributor afaik.

Amuse Ti is nice but waaaay too ******* expensive

Hytech makes 2.5" exhausts too

FWIW i would go custom like this:



Best bang for the buck and perfect fit too.




Modified by Big Phat R at 9:22 AM 1/8/2004

 

I think Kakimoto makes 2,5" ID exhausts for the DC2R.

 

i think the JUN is not to sure though

 

jun is jdm standard 60.2mm.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by visi0n &raquo;</TD></TR><TR><TD CLASS="quote">T1R is 2.5 inch right? thats id or od?</TD></TR></TABLE>

All exhausts are measured in OD. T1R is 63mm ~ 2.48"

Supply problems have been fixed as well as the problem with the fitment.

 

i was looking through ajr's website and notice that under the T1R section they have a muffler that looks like the ApexI N1. does T1R make a full catback using that muffler instead of what everybody has?

going price of that setup?

 

no they do not, that was the old style canister

 

i think the new style is butt ugly.

if the buddyclub didn't stick out soo much i'd get that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Big Phat R &raquo;</TD></TR><TR><TD CLASS="quote">
FWIW i would go custom like this:



Best bang for the buck and perfect fit too.


Modified by Big Phat R at 4:43 PM 1/7/2004</TD></TR></TABLE>

Who made that? i can only get my hands on 2.5" OD piping.

 

Speaking of T1R - are there pics out of the new batch? Did anyone receive it yet?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Big Phat R &raquo;</TD></TR><TR><TD CLASS="quote">Modified by Big Phat R at 4:43 PM 1/7/2004</TD></TR></TABLE>
custom

 

what kind of muffler do u have on to that custom piping and is it loud?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kyle244947 &raquo;</TD></TR><TR><TD CLASS="quote">what kind of muffler do u have on to that custom piping and is it loud?</TD></TR></TABLE>



Vibrant Technologies. Really ******* loud.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Big Phat R &raquo;</TD></TR><TR><TD CLASS="quote">



Vibrant Technologies. Really ******* loud.</TD></TR></TABLE>

did you weld your stock exhaust tip on the end??

-Larkin who's thinking about doing this when he goes custom

 

vibrant is 2.5 inch piping? link to their website?

 

ttt

 

I had T1R's new exhausts,whicc had fitment probs,so I returened it.Asides from this point though,I didn't like how the tip of muffler was touching bumper (cut out curve for muffler tip).

I only had it on for approx. 4 months,and the area on bumper cut out was MELTED/BURNED .I'm guessing due to heat from muffler tip.I now have Spoon N1 muffler and it sits behind bumper,so bumper-melting-problem was solved.