Hi guys - Im going D-series so i need to get rid of some of this stuff -



T3/t4b turbo – perfect for any Honda. Capable of over 400 hp. Less than 3000 miles on it. Maybe a little big for a stock SOHC, but perfect size for an LS or GSR. Got full boost by 3500 rpm on LS. Running 11 lbs it was enough to catapult me to mid 12's - SOLD to 4rceFedDeceiver


B-series Turbo Manifold – Only used for 1000 miles – Made by Jon at the drop shop. Awesome mani – TIG welded, Thickwalled steel garunteed to never break. Its just starting to turn those pretty rainbow colors. Never had a boost spike or creep with this mani. It is AWESOME!!! its a shitty pick - looks MUCH prettier in person SOLD to 4rceFedDeceiver


Dumptube – Made for a Tail or Deltagate SOLD to 4rceFedDeceiver


3 in Downpipe. – For a 5bolt flange – Has O2 bung. Was mandrel bent, but the shitty shop I went to put small crinkles in at the end of the one bottom 90. Not sure if it will bolt up to your exhaust perfectly, cause I custom made my own - SOLD to 4rceFedDeceiver


DSM BOV with Upper charge pipe – 1 gen DSM BOV welded to 2.25 in pipe and (I think 60 angle). It was used on a civic so the lower charge pipe went through the hole where the air box used to be. Same place where CAI are. $75 –
Both upper and lower for $110


Autometer Boost gauge – will trade for 30psi Autometer boost gauge or $40

A/F gauge - $30


ZEX kit with NOS purge kit and bottle cover – ZEX kit in perfect condition 55,65, and 75 shot. Also included is a NOS purge kit and bottle cover also in perfect condition. All hardware is included $450 shipped


White faced – Indiglow (lights up blue) Oil temp gauge SOLD

White faced – Indiglow (lights up blue) water temp gauge SOLD

White faced – Indiglow (lights up blue) vacuum gauge SOLD

DSM 450 injectors –SOLD

And for the DIYer’s
B series – CNC cut head flange – paid $55 off Arturbo - $40 shipped
5 bolt flange $20 shipped ,
4bolt – T3 flange (on inlet of turbine) $15 shipped
Tial style WG flange - $15 shipped
2 hole – 2.5in cat flange - $15 shipped

LS Swap can be seen here - https://honda-tech.com/zerothread?id=722107 with better pics of mani, etc

All prices are OBO lowballers will be ignored

if you need to get a hold of me, feel free to im, email or call me

burkemdavis2@yahoo.com
330 788 6761
THANKS!!!
Burke


Modified by Burke at 12:48 PM 1/8/2004


Modified by Burke at 7:42 PM 1/8/2004

 

1 on mainfold and maybe down pipe.

 

ok, dumptube is made to work perfectly with that mani and downpipe with a tial or detagate - will include 38mm tial for a firm $210
thanks

 

would the dump tube flange work with a turbosmart? im not sure if they use the same flange.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smurfey002 &raquo;</TD></TR><TR><TD CLASS="quote">would the dump tube flange work with a turbosmart? im not sure if they use the same flange.</TD></TR></TABLE>

yep - same flange

 

whats the specs on the turbo?

 

.48 on both or .50 on the cold. i'll double check tomorrow. either way, it spools relatively fast and hits pretty hard the whole way through. i think it way as close to a perfect match for the motor as i could have asked for.

 

buy my stuff. im poor

 

bump. im gonna list this stuff on ebay today or tomorrow, cause you can do it for a penny

 

put stuff on ebay
http://cgi6.ebay.com/ebaymotor...ws=50
ill end them for you guys

 

Bump for good parts

 

thanks for the bump and all pms have been answered
Thanks

 

Bump for a good guy. I have seen all of these parts in person

 

Thanks MilanoRedLST!!!
bump for some sold parts - turbo, mani, dump, and tial
Thanks 4rceFedDeceiver