02 Pinout for ITR into EK
Could somebody please tell me which wires from the secondary 02 sensor go to what pin location on the ECU harness?
The motor is a '99 JDM ITR in a '98 Civic DX
I have been running with a disconnected secondary for months on end. I am just getting around to hooking it up now. I am now stuck after finding out the information that I have is incorrect.
My emissions test is coming up and I need this ****** wired up before attempting the test.
BTW - I went through 2 pages of recent topics and 7 pages of archived information on this with no info. Also, please do not tell me to just use my DX harness (don't have it anymore). I just need the pinout locations please.
Thanks
The motor is a '99 JDM ITR in a '98 Civic DX
I have been running with a disconnected secondary for months on end. I am just getting around to hooking it up now. I am now stuck after finding out the information that I have is incorrect.
My emissions test is coming up and I need this ****** wired up before attempting the test.
BTW - I went through 2 pages of recent topics and 7 pages of archived information on this with no info. Also, please do not tell me to just use my DX harness (don't have it anymore). I just need the pinout locations please.
Thanks
Im pretty sure that if you were holding the ECU and looking down at the plugs that it is in the far left connector...where exactly im not sure. IF this is an option you can go to acura and borrow their shop manual and see the pinout diagram...usually theyre cool about that kinda stuff.
Anyone else? The pinouts I listed do not seem to work. I am still throwing a code and I am beginning to get seriously ******* aggrevated at this point.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2000CX »</TD></TR><TR><TD CLASS="quote">i have been trying to do this with my 00 Si motor forever also...with no luck yet either. this is a "i feel your pain" bump...good luck man.</TD></TR></TABLE>
Yeah, I remember talking to you about this when I was parting out the Si.
Yeah, I remember talking to you about this when I was parting out the Si.
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spektrum »</TD></TR><TR><TD CLASS="quote">Which ECU are you running?</TD></TR></TABLE>
I am running a JDM ITR ECU and '98 EX harness.
I am running a JDM ITR ECU and '98 EX harness.
Disregard all of this bullsh!t unless.
I am not even throwing an O2 code.
If you have the information, I am sure others on this board could benefit from it though, so feel free to post it.
Thanks for your help guys.
I am not even throwing an O2 code.
If you have the information, I am sure others on this board could benefit from it though, so feel free to post it.
Thanks for your help guys.
Thread
Thread Starter
Forum
Replies
Last Post
louie3252
Hybrid / Engine Swaps
1
Apr 26, 2006 04:24 PM



