Red Rock pics of my ITR *6 pics, 56k friendly*
Thread Starter
Honda-Tech Member
Joined: Oct 2003
Posts: 14,394
Likes: 0
From: Armed and Ready
New shots of the JUN header (page 3) *5 pics, 56k friendly*
here are a few pics someone took of my ITR last weekend at redrock. wish i had my camera though 
the quality of these aren't too hot but there's a couple decent ones of the cage and volks. more to come, the lighting here don't do PY any justice whatsoever.
looks like my car is about to get ran over, these are a couple of friends cars from vegas
i'll post some more pics later this weekend after i install some of these parts on my car, the new JUN header glows bright bright red after the initial start up, i'll be sure i wait untill night to start it up so i can get some good pics of it. from what i hear it only glows the very first time you start it *shrug* take care guys, be safe
Modified by JUN.R at 4:30 AM 1/9/2004
Modified by JUN.R at 4:34 AM 1/9/2004
the quality of these aren't too hot but there's a couple decent ones of the cage and volks. more to come, the lighting here don't do PY any justice whatsoever.
looks like my car is about to get ran over, these are a couple of friends cars from vegas
i'll post some more pics later this weekend after i install some of these parts on my car, the new JUN header glows bright bright red after the initial start up, i'll be sure i wait untill night to start it up so i can get some good pics of it. from what i hear it only glows the very first time you start it *shrug* take care guys, be safe
Modified by JUN.R at 4:30 AM 1/9/2004
Modified by JUN.R at 4:34 AM 1/9/2004
Very nice car
Thread Starter
Honda-Tech Member
Joined: Oct 2003
Posts: 14,394
Likes: 0
From: Armed and Ready
Re: Red Rock pics of my ITR *6 pics, 56k friendly* (Denny)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Denny »</TD></TR><TR><TD CLASS="quote">want to trade rims 
</TD></TR></TABLE>
you're selling your ITR remember
</TD></TR></TABLE>you're selling your ITR remember
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Oct 2003
Posts: 14,394
Likes: 0
From: Armed and Ready
if you guys want, i can give you the name and number of the guy who did the cage, he does awsome work and is out of san diego, ca. here's his shop site.
http://www.1320motorsport.com
if you call, ask for george (owner) and tell him cory from vegas sent ya
http://www.1320motorsport.com
if you call, ask for george (owner) and tell him cory from vegas sent ya
Honda-Tech Member
Joined: Jul 2002
Posts: 14,274
Likes: 0
Re: (JUN.R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JUN.R »</TD></TR><TR><TD CLASS="quote">who did the cage</TD></TR></TABLE>
That's not a cage, its a rollbar with some add on door bars. Where's your padding? That's quite dangerous. Be careful.
That's not a cage, its a rollbar with some add on door bars. Where's your padding? That's quite dangerous. Be careful.
Thread Starter
Honda-Tech Member
Joined: Oct 2003
Posts: 14,394
Likes: 0
From: Armed and Ready
Re: (Chris N)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris N »</TD></TR><TR><TD CLASS="quote">
That's not a cage, its a rollbar with some add on door bars. Where's your padding? That's quite dangerous. Be careful.</TD></TR></TABLE>
get your head back of your *** chris you don't know what you're talking about. it's NOT a roll bar with add on door bars. it was made from 3 20ft pieces of chromoly, from scratch, nub
on the other note a rear cross bar and a harness bar is getting added. don't you think that foam padding is flamable? i do, know what you're talking about when you open your mouth. it'd cut your posts down by about 7000
That's not a cage, its a rollbar with some add on door bars. Where's your padding? That's quite dangerous. Be careful.</TD></TR></TABLE>
get your head back of your *** chris you don't know what you're talking about. it's NOT a roll bar with add on door bars. it was made from 3 20ft pieces of chromoly, from scratch, nub
on the other note a rear cross bar and a harness bar is getting added. don't you think that foam padding is flamable? i do, know what you're talking about when you open your mouth. it'd cut your posts down by about 7000
Honda-Tech Member
Joined: Jun 2002
Posts: 9,925
Likes: 0
From: Milwaukee, WI, USA
Re: (Chris N)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris N »</TD></TR><TR><TD CLASS="quote">Where's your padding?</TD></TR></TABLE>
Shouldn't there be a crossbar of some kind too?
Shouldn't there be a crossbar of some kind too?
Senior Member
Joined: Oct 2001
Posts: 30,826
Likes: 0
From: RIP Craig Jones
Re: (JUN.R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JUN.R »</TD></TR><TR><TD CLASS="quote">don't you think that foam padding is flamable? i do, know what you're talking about when you open your mouth.</TD></TR></TABLE>
Not the high-density stuff, which is what you probably ought to be using anyways.
It looks like a drag cage, hence the chromoly, where you can save weight by using thinner material.
Not the high-density stuff, which is what you probably ought to be using anyways.
It looks like a drag cage, hence the chromoly, where you can save weight by using thinner material.
Thread Starter
Honda-Tech Member
Joined: Oct 2003
Posts: 14,394
Likes: 0
From: Armed and Ready
yeah there was padding around where my head sits along with the passangers, i'm adding the cross bar and a couple more points to stiffen up the chassis a little more, so i took the padding off, should be done soon
Honda-Tech Member
Joined: Jul 2002
Posts: 14,274
Likes: 0
Re: (JUN.R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JUN.R »</TD></TR><TR><TD CLASS="quote">
get your head back of your *** chris you don't know what you're talking about. it's NOT a roll bar with add on door bars. it was made from 3 20ft pieces of chromoly, from scratch, nub
on the other note a rear cross bar and a harness bar is getting added. don't you think that foam padding is flamable? i do, know what you're talking about when you open your mouth. it'd cut your posts down by about 7000</TD></TR></TABLE>
That is not a cage. LOL. sorry. Unless its some kind of drag thing.
Regardless, no padding = not good. Bang your head on that in an accident and well... you're dead.
If this is the way H-T is going, I'm thinking I'll probably stop reading most of this crap.
Who the **** are you anyways? What's with the personal attacks? Just becuase you post in every thread possible and most of it is useless, you think you've earned the right to bash people senselessly?
Chris - really tired of all the new unintelligent ******** on this site.
Edit - that looks like an kirk rollbar with some extra added door type bars.
get your head back of your *** chris you don't know what you're talking about. it's NOT a roll bar with add on door bars. it was made from 3 20ft pieces of chromoly, from scratch, nub
on the other note a rear cross bar and a harness bar is getting added. don't you think that foam padding is flamable? i do, know what you're talking about when you open your mouth. it'd cut your posts down by about 7000</TD></TR></TABLE>
That is not a cage. LOL. sorry. Unless its some kind of drag thing.
Regardless, no padding = not good. Bang your head on that in an accident and well... you're dead.
If this is the way H-T is going, I'm thinking I'll probably stop reading most of this crap.
Who the **** are you anyways? What's with the personal attacks? Just becuase you post in every thread possible and most of it is useless, you think you've earned the right to bash people senselessly?
Chris - really tired of all the new unintelligent ******** on this site.
Edit - that looks like an kirk rollbar with some extra added door type bars.