Just finished my valve cover
Thread Starter
Member
Joined: Jan 2003
Posts: 1,746
Likes: 0
From: Kansas City, MO
Re: Just finished my valve cover (delpoop!)
Well, first I painted the whole thing letters and all, then sanded down the tops of the letters. After that, I put vaseline on the lettering and resprayed it to take care of any scraping on the paint caused by sanding it down. I did this to get the lettering as "sharp" as possible, if that makes any sense. If you just you vasoline first, the letter have messy edges from being careless with the vaseline. Then I baked it at 200 for an hour or so....makes the paint rock hard. I hope I never wanna change this paint, its going to be a bitch to take off.
Joined: Oct 2003
Posts: 453
Likes: 0
From: Winchester, VA, USA
Re: Just finished my valve cover (emoBB1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by emoBB1 »</TD></TR><TR><TD CLASS="quote">Very decorative and designish! Looks good 
</TD></TR></TABLE>
Viva La Bam rocks
</TD></TR></TABLE>Viva La Bam rocks
Trending Topics
In-N-Out Burger
Joined: Apr 2003
Posts: 5,424
Likes: 0
From: 1320ft OC LA, XX, USA
Re: Just finished my valve cover (notstock93)
Got any other full sized shots? ....
Taking it off wont be so bad....That's why they have aircraft paint stripper. Wait...that doesn't sound right...
NRG
Taking it off wont be so bad....That's why they have aircraft paint stripper. Wait...that doesn't sound right...
NRG
Banned
Joined: Jul 2001
Posts: 10,768
Likes: 0
Re: Just finished my valve cover (TorganFM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TorganFM »</TD></TR><TR><TD CLASS="quote">
Viva La Bam rocks </TD></TR></TABLE>
hahahahah when he painted the kitchen blue! I remember that one!
Viva La Bam rocks
</TD></TR></TABLE>hahahahah when he painted the kitchen blue! I remember that one!
