On the bottom of these front bumpers, theres a flap that is connected by 2 plastic screws to the car. I guess its a mud flap. But a while ago, my brother drove over one of those parking spacers, and the plastic screws were ripped out. Now i'm driving around with that thing flapping down and sometimes when i drive into a drive way, it scrapes. What kinda screws can i use to replace it???

 

Any screw that fits and holds umm.. should work?

 

When I got my car, that part was hanging down. I couldn't find any screw/bolt that would even get close to working.. it looks like it needs some kind of clip. Anyway, I used zip-ties to hold it up.. works great.

Justin

 

The dealer sells those plastic fasteners.

Dustin

 

Yeah the dealer does sell those fasteners, however, I've noticed on alot of Integras they use bolts instead of plastic fasteners which seem to work much better. However, I dunno if you can use these bolts on an Integra that originally used the plastic fasteners.

Fix it quick or make sure you don't continue to pull on it using curbs and parking blocks, because it'll eventually pull you bumper off the fender

 

Zip Ties
Dealer probably charges like $5 a clip

 

i had that same thing happen, all i did was go to home depot and buy some black zip ties. I haven't had a problem since

 

Kewl, I think i'll zip tie it up. Thanks for the replys