whats everyones times on a d16(y8 or z6) with only intake, header, and cat-back? 1/4 mile, speed, 60' times...
-ryan

 

I ran16.1 consis with my fully loaded ex coupe with a intake clutch exhuast and shitty tires

 

I ran a 16.1 also in the EX with I/H/E but now down to a 13.9 at 10-11psi with the turbine

 

what about trap speeds, and 60' times?

 

anyone else? wanna compare 1/4 mile time, speeds, and 60' times...

 

slow....

 

11.4 at 156 mph!!

 

I ran a 15.9 with a .247 reac. and 2.24 60' and beat a (this is bound to start a war) RSX that ran a 16.5....I think (just maybe) that he was a shitty driver.
Mods are below....I also have the shittiest tranny....CX...I am swapping that out soon for a exedy clutch and D16y8 tranny. I also ran 25 PSI in my Falken Azenas
EDIT: The tranny also grinds every upshift and the clutch slips so bad I feel like am in reverse warp speed or something.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by amy del sol &raquo;</TD></TR><TR><TD CLASS="quote">11.4 at 156 mph!!</TD></TR></TABLE>
MODS!!!

 

**** i seen the pic of here engine shes got a b16 that thing wont give here those numbers.

 

haha look at her link stock only intake lol

 

1993 Honda Civic LX Sedan (Weighed in at 2320 lbs without driver)
D15B7 Block and Tranny
D16Z6 Head / Intake Manifold / Exhaust Manifold
Full Interior with Spare Tire, Tools
Short Ram Intake w/ removed headlight
Welded-on straight through eBay muffler
Stock Cat/Exhaust Piping
Original Clutch w/ 160,000 miles
No PS belt
175/50/13 All-Season tires on 13" VX Wheels @ 23psi

Timeslip all the way to the right:

 

Is mine a decent time??

 

what tranny are you running? If its the stock non z6 tranny i'd say its alright.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GTlvr82 &raquo;</TD></TR><TR><TD CLASS="quote">Is mine a decent time??</TD></TR></TABLE>

Hell yes...the CX transmission is bullshit...I wouldn't be suprised if you were .7-.8 seconds faster with the Z6 tranny

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue &raquo;</TD></TR><TR><TD CLASS="quote">what tranny are you running? If its the stock non z6 tranny i'd say its alright.</TD></TR></TABLE>

He's running the CX tranny! I'd say that time is incredible!

 

yea it is.

 

i ran a 16.2 with my 00civic ex i/h/e . . on a 92degree day at one of the worst tracks. n by the way, i pull on my friend 99si(intake, exhaust) up until early third gear. is that good?

 

See sig that was with an *** 2.38 60 ft. and it was humid out. Still I am happy with the time and the car has 125,000 miles.

 

92 Civic DX hatch with 93 Z6, I/H/E full interior, street tires. 15.3 at 90mph.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by makaveli284 &raquo;</TD></TR><TR><TD CLASS="quote"> n by the way, i pull on my friend 99si(intake, exhaust) up until early third gear. is that good?</TD></TR></TABLE>

bull crap, cause i have a 99 si with intake and exhaust and i have dogged every ex coupe iv raced, there would have to be some mods done to your car.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIowner &raquo;</TD></TR><TR><TD CLASS="quote">

bull crap, cause i have a 99 si with intake and exhaust and i have dogged every ex coupe iv raced, there would have to be some mods done to your car.
</TD></TR></TABLE>

Read the complete post again! He has an intake, header, and exhaust.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by makaveli284 &raquo;</TD></TR><TR><TD CLASS="quote"> n by the way, i pull on my friend 99si(intake, exhaust) up until early third gear. is that good?</TD></TR></TABLE>

I believe it. 99-00 SI's are overated The tq is just not there to get it out of the hole Granted, on the free-way that SI pulls hard as hell on your single d

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Steve00GSR &raquo;</TD></TR><TR><TD CLASS="quote">

Read the complete post again! He has an intake, header, and exhaust.

</TD></TR></TABLE>

yeah, i did and on a 92 degree day, im sorry intake, exhaust, and headers, won't run that on a 92 degree day, especially in an ex coupe

 

the best that i have ran in a 1/4 mile was 16.00 at 87 mph

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIowner &raquo;</TD></TR><TR><TD CLASS="quote">

yeah, i did and on a 92 degree day, im sorry intake, exhaust, and headers, won't run that on a 92 degree day, especially in an ex coupe </TD></TR></TABLE>

I'm sorry, but even on a 92 degree day an EX with bolt ons will easily run a 16 flat, on a 92 degree day And he's right about pulling on Si's out of the hole, and then getting passed high 2nd or early in 3rd