I was thinkin of putting a gsr motor in my hatch but not in the engine bay.i haveta pick up the motor 3 hours away from here and i cant get a hold of any other vehicle other than my own.i really dont feel like renting anthing either cause im a cheap ***. Has anyone ever done this and made it possible.Like if i remove my seats(other than drivers of course)would this work?

 

yeap it will work

 

you might be able to...but might be a tight fit...or why not rent a UHAUL truck if you guys have one there or something similar.

 

lol

go find somebody with a truck....you dont want that engine leaking/tipping over in your interior n00b

 

As long as the motor and tranny are seperated I wouldn't think it would be an issue.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Synergy001 &raquo;</TD></TR><TR><TD CLASS="quote">you might be able to...but might be a tight fit...or why not rent a UHAUL truck if you guys have one there or something similar.</TD></TR></TABLE>if theres a way to save me some cash,i go with it

 

my freind rode around with his motor in the passenger seat for over a weak. It was funny because when he made a hard stop he would have to make a grab for the motor so it didn't hit his dash.

Bottom line, it very possible. But for a complete swap I would rather ask a freind who has a larger car/truck.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dre &raquo;</TD></TR><TR><TD CLASS="quote">been there.....done that</TD></TR></TABLE>

lol.

Oh yeah....the hatch is the most versatile car out there. My friends just picked up and engine about an hour away a few weeks ago....3 people plus full swap and axles in an EK....lol

You'd be suprised at what you can fit in there

 

you can easily fit gsr swap in there. just take engine and tranny apart

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Emerika &raquo;</TD></TR><TR><TD CLASS="quote">

lol.

Oh yeah....the hatch is the most versatile car out there. My friends just picked up and engine about an hour away a few weeks ago....3 people plus full swap and axles in an EK....lol

You'd be suprised at what you can fit in there </TD></TR></TABLE>No kidding eh? I f@ckin love these cars.

 

I've managed to fit a CF hood and Buddy Club side skirts in my EG lol.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Knocturnal &raquo;</TD></TR><TR><TD CLASS="quote">I've managed to fit a CF hood and Buddy Club side skirts in my EG lol.</TD></TR></TABLE>I dont see how that could be much of a problem but

 

no problem.i carry swaps in my EG all the time.i always throw an old dismounted tire in the back to sit the oil pan down in to.this helps keeps the motor stabilized.
chris

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeamNextGenChris &raquo;</TD></TR><TR><TD CLASS="quote">no problem.i carry swaps in my EG all the time.i always throw an old dismounted tire in the back to sit the oil pan down in to.this helps keeps the motor stabilized.
chris</TD></TR></TABLE>

2 swaps....full disk conversion....front a rear seats....all carried in my 92 eg!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeamNextGenChris &raquo;</TD></TR><TR><TD CLASS="quote">no problem.i carry swaps in my EG all the time.i always throw an old dismounted tire in the back to sit the oil pan down in to.this helps keeps the motor stabilized.
chris</TD></TR></TABLE>would i have to seperate the tranny?

 

anyone ever attempted this with a coupe? i don't think it will fit

 

i ahve moved a d series swap in my hatch, we got it in jsut fine with the tranny still attached....but getting it out solo i had t separate the tranny. i would recommend separating them before you put it in the car though.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chad &raquo;</TD></TR><TR><TD CLASS="quote">

2 swaps....full disk conversion....front a rear seats....all carried in my 92 eg!!</TD></TR></TABLE>IN THE SAME TIME!!!!!???? YEA RIGHT!!

 

it will work just take out the passenger side seat and put it in there. if not you can put it in the back but your car will sag real low

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by salbaje &raquo;</TD></TR><TR><TD CLASS="quote">it will work just take out the passenger side seat and put it in there. if not you can put it in the back but your car will sag real low </TD></TR></TABLE>see thats what i was thinking to put it in through the side.

 

it will fit for sure!! when i sold my sohc vtec FULL SWAP, with theshidt linkage still hooked on to the tranny! we fit inthe back of a RSX with the back seats and the 2 front seats!...if u take out the back seats, it will fit!! the onlyhard part will be takin the motot out!

 

home depots truck are 20 bucks an hr!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BLUE EH3 &raquo;</TD></TR><TR><TD CLASS="quote">home depots truck are 20 bucks an hr!</TD></TR></TABLE>lol for some reason i find that funny,probably cause i used to work there

 

My friend had his d16 complete with transmission in the back of an integra! It should fit in a hatch, but it's going to be a bitch to take out

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rocco &raquo;</TD></TR><TR><TD CLASS="quote">IN THE SAME TIME!!!!!???? YEA RIGHT!!</TD></TR></TABLE>


the only seat i had in my car was driver seat.....one swap in passenger seat area...disks where rear seat goes....other engine in trunk.....seats on pop of it all!!! boo ya.....lick my chode