I remember reading a few post about people looking for a set: https://honda-tech.com/zerothread?id=669102

 

Damn!
Just when I was considering going with an LS tranny and a Quaife! LOL!

 

Ummm, i think if you ran this you might just run out of gears... maybe

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AssPenny &raquo;</TD></TR><TR><TD CLASS="quote">Ummm, i think if you ran this you might just run out of gears... maybe </TD></TR></TABLE>

You have no idea how may times I wish I had a 6 or 7 speed.
Maybe I'm just getting old?

I'll be working on my car over the winter to have it in condition for some serious/continuous lapping come next Memorial Day.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zygspeed &raquo;</TD></TR><TR><TD CLASS="quote">I'll be working on my car over the winter to have it in condition for some serious/continuous lapping come next Memorial Day. </TD></TR></TABLE>

Hell yeah... I'll buy a nice bottle of wine at the registration party/bar if I get a ride

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AssPenny &raquo;</TD></TR><TR><TD CLASS="quote">Ummm, i think if you ran this you might just run out of gears... maybe </TD></TR></TABLE>

But for those in the world who like running 6000 rpms in 5th on the highway it might work well

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AssPenny &raquo;</TD></TR><TR><TD CLASS="quote">Hell yeah... I'll buy a nice bottle of wine at the registration party/bar if I get a ride </TD></TR></TABLE>

Hmmm ... that's one way to get to the top of the list.

Chad took it out again at Summit Point last weekend and I think I've got a good handle on what's needed to improve the engine and brake temps.
The suspension's working fine, though I'd like to play a little with the height of the corners a bit.

 

Ed: Have tou corner weighted it yet? or just guessing at it thus far?

 

Just guessing, and haven't really touched it since the install in June.
I've taken out/sold the Kirkey bar and will be going back to a SpeedWare "camera mount" that I got used from Trey.

I have the measurements from when I'd had the car weighted with the Bilsteins, and have a good feel for what seems to work. Once I set it up to where I think it's close to my liking I'll take it to one of the local race shops and see what the numbers turn out to be, and make additional adjustments from there.

LOL! Chad was really looking forward to passing that Z06, but my car seemed to lose it's "edge" after 2-3 laps.

 

Cruise on down to P1, they've got scales

 

I would, but I need to install the bigger IC I traded for with Chad (replacing the stock Drag III one), and get together with Steve and deal with the rest of the stuff first.

Going down to P1 will be mostly icing on the cake.

P.S. When I finally wear out or decide to get rid of the A032R's I've had on the car since Gingerman, I'll be mounting these Dunlop D01J's I bought from Rodney some time ago.




Modified by zygspeed at 4:38 PM 11/6/2003

 

.....what size are those things Ed?