Just wondering what plugs and wires you guys with boosted d16's are running... Right now i got NGK platinums but they burn alittle too hot for boost so i think im gonna switch to ZFR7F-11's I hear there are more boost friendly. As far as wires, im running 8.5mm magnecore's and love them. Also what would be a good gap for the ZFR7F-11 @ 8psi? Thanks in advance...

 

i used cheapest ones i could find at walmart and i bought mass quanties of em i kept wasting them and i wasnt feeling th higth prices of those fancy plugs (on my b16 thats diff) anyways i went through magnacores and msd wires i hated them so i got nology hotwires and it made a noticeable differance in power, and when i pull out the plug wire and see the spark its WAY bgger then the magnacore and msd sparks combined but thats just my setup though...i found out expensive plugs were knida a waste and i ddint feel a difference i though i wanst going to be safe with cheepies but 10k later im still pulling...

 

Is no one aware of the correct gap for me?

 

slightly tighter than stock should do it.

-Dustin