how much hp would a stock b18b with a 18g greddy turbo @ 10psi and a tuned aem ems make? How much would it make with a ball bearing t3/t4? Thanks.

 

my friend's on a t3/t4e 57 wheel made 270 hp 240 tq tuned on hondata at 10psi

 

about 250. that turbo wont be makning as much power at the same boost level as a proper t3t4

 

I think the numbers would vary depending on the rest of the setup. IE: efficiency of intercooler, nature of the tune (aggresive or conservative), exhaust size. What does the rest of the setup consist of?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by highmilehatch &raquo;</TD></TR><TR><TD CLASS="quote">I think the numbers would vary depending on the rest of the setup. IE: efficiency of intercooler, nature of the tune (aggresive or conservative), exhaust size. What does the rest of the setup consist of?</TD></TR></TABLE>


exactly way to many factors to consider

 

bah the guy wants approximate numbers, give him approximate numbers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Short Round &raquo;</TD></TR><TR><TD CLASS="quote">bah the guy wants approximate numbers, give him approximate numbers

</TD></TR></TABLE>

approx.....200whp - 300whp....... seriously...
tuning makes all the difference in power, i'm not talking about 5-10 hp but i've seen gains of 30-40hp made just be retuning(runing low boost)..i picked up 27whp by tuning a little better (leaning it out a little more) and i'm only runing 9psi

 

i'd put the ceiling at around 280, especially with an 18g

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Short Round &raquo;</TD></TR><TR><TD CLASS="quote">i'd put the ceiling at around 280, especially with an 18g</TD></TR></TABLE>

ok 200whp - 280whp.....

 

i dunno never dynoed my setup but made my b18b turbo with t3/t4 in an eg run 13.5 easy