i searched with no results...

what bolts do you use to connect a T3/T04e to a revhard b-series manifold?

thanks

 

This was posted by Flamenco-T a while back I think... hopefully its somewhat helpful:

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote"> Manifold to Turbo bolt size

Drag, Rev-Hard, Inline Pro - 10mm x 1.25 [30mm] ( length of the bolt)
Max-Rev - 3/8 x 24 fine thread

Turbo to Downpipe flange bolt size

T3 only 8mm x 1.25mm [20mm]

Oil return Flange bolt size

8mm x 1.25 [20mm]

35m Wastegate to manifold bolt size

8mm x 1.25 [20mm]

Stock Map Sensor Bolt

4mm x 0.7mm [15mm]

O2 sensor bung or bolt to plug it up

18mm x 1.50

Oil Return Parts list

Oil Drain Flange 1/2"

1/2" to -10AN adapter 45 degrees adapter

45 deg -10AN swivel seal hose end

Straight -10AN Swivel seal hose end

1' of -10AN 200 series hose.

-10 steel weld on bung

**<FONT COLOR="red"> I only sells and a distributor for all Goodridge Fittings and Hoses, <U>Goodridge</U> </FONT>

Oil feed line part list

1- male 1/8" BSPT to female 1/8" NPT adapter (aluminum)
1- 1/8" NPT Brass Tee adapter with one male out and two females.
1- 3.5' of -3AN lines with hose ends attach
1- straight 1/8" NPT to -3AN adapter
1- 90 deg 1/8" NPT to -3AN adapter

Top of stock fuel filter bolt size if you wanna run a SS lines to filter

12mm x 1.25


Greddy EGT probe bung thread size

1/8" NPT with 27 thread pitch

I'll add more as I remember...or if you have a suggestion, post it, and I'll add it to my list

stan




Modified by Flamenco-T at 4:10 PM 9/24/2003</TD></TR></TABLE>

 

i used an OEM Honda 14mm bolts w/lock washers... its holding up for almost 2 years now

 

thanks a lot, thats really helpful!