ive tried a couple of different ways and havent got it to allign together, just wondering the best way to connect the put the si tranny back on. thanks alot

 

Did you use a clutch alignment tool?

 

yeah that and if you got a buddy to help. it just takes a bit of patience

 

that clutch was never taken off so it still should be alligned, so far ive had me and a friend try two seperate times and couldent get it to work.....

 

Make sure the dowel pins aren't bent out of shape. I had that problem once.

 

When I did my clutch while the motor was still out I got it aligned perfectly but it still wouldnt go in, the dowel pins were in and it would support itself but I had to kinda hit it on there. So once you get it lined up try a rubber mallet or a block of wood + hammer and tap it on.

 

kept tryin again tonight with no luck..... allthough my back hurts