This past weekend I took on the task of diagnosing the gas smell from my CRX. I dropped the fuel tank and found that it was seaping through the seam of the tank...ordered new tank. I figured while I had the tank down, I would replace the fuel pump too...ordered Walbro pump.

I noticed that the feed line going from the fuel pump towards the front end is corroded. Honda wants about $90 or soo for a new one. I was wondering if anyone could help me out with making my own? Steel braided lines and where to get them? Where do I get the fittings?

I appreciate all the help in advance.
Thanks,
Jesse

 

here is a post i started up. feel free to aks more questions:
https://honda-tech.com/zerothread?id=532658

also, check the forced induction forum for some info on fuel lines. i know a few members in there have replaced their stock lines with SS line and AN fittings.