ok I am curently changing a blown head gasket on my 85 civic hb. I just put the head back on yesterday, got it all torqed and everything. But when I tryed to put my exaust manifold back on I for got that while disacembling 2 of the 3 bolts holding on the left side broke and are still in there. There is almoste zero room between the radiator and the head.
So right now I only have one bolt holding on the left side and I am almoste compleetly done putin it back together and need to know what to do before I go the rest of the way.

 

i would drain and remove the radiator before removing the head again,you can just reuse the coolant if its still good..good luck

 

Head gaskets cannot be reused after they have already been compressed.