Hey guys, Im running an E-Manage on a Y7 in a DX hatch (97) and with my wideband, when I go into full throttle, it still reads off the charts rich even with all of the ***** turned back to full lean. Any ideas?? Im about to give the hell up on this E-Manage and get something esle. Only other idea is that my CEL is throwing me into limp mode..why Im soo damn rich. I have a code 41 (primary 02 sensor heater) because I havent been able to get a straight answer on how large a resistor I need to wire between the heater wires to my car (using my Techedge 1.5s narrowband output to the cars ECM). I did some math and got something like 30, but put a 30 on there and it got DAMN hot, so I ended up taking it off. Any ideas guys???

 

Oh yeah...and Im getting big black smoke clouds out the back when it stutter and go super rich...but when I pull my plugs...they look white on the ends...meaning that I'm lean..any ideas guys??

 

get the support tool,injector harness, and ignition harness...It unlocks a whole lot with the E-Manage.

 

the white tips are from running normal off boost. just keep the stock primary o2 running and use the 5 wire on the techedge.