OK long story short, I had an all motor setup that blew and all kinds **** went into the oil, left all kinds of marks in the crank. It was cut once, i do not want to have it cut again, I dont even beleive they make bearings small enough to take another cut out of it. I really like the eagle crank but really dont want to spend 700 bucks on it. So anybody know of a place that sells cranks for the GSR?

 

i have an LS one

sam

 

Thanks but I dont think that will help me out right now. But wait do the LS and GSR use the same crank? I thought the LS rod was longer than GSRs?

 

it is. you could use an ls crank with ls bearings and ls spec rods thogh

give ya little more displacement

 

Yeah but that would be getting into that whole rod ratio deal. You know like the LS/VTEC putting to much stress on the rods and that kinda thing. Oh ****, I think I opened up a whole new can of worms here.

 

thats all a bunch of hype. as long as you use better rod bolts you are fine.

sam

 

It kinda defeats the purpose of doing a Ls/Vtec if you don't use the LS crank and rods cuase they have that extra stroke which is why the Ls/Vtec is a stronger motor...........................