ive heard but never seen anything of these cams, some have em?

 

go over on the ef1 board, ryan.949 made 183.3hp/124.5tq at trackmasters

Here were the specs of the motor:
1994 JDM B18C
ITR ported and polished head
CP 81mm high compression pistons
Crower Billet rods
Manley SS valves
EF-1 valvetrain
EF-1 M22 cams
ITR IM with port matched TB and runners
Carsound Highflow Catalytic Converter
AEM CAI
JDM DC 4-1
10.7CR

but the hp/tq numbers are low because something happened to his engine and he was only able to rev to 7900-8000rpm, heh so u guys do the math and im sure bobdc2, or ryan will chime in on this

 

Good topic, I would like to hear some first-hand comments as well!

 

damn that sucks. i'm sure those cams can perform exellent from reading its lift and duration.. for comparoson i made 200whp on stock b16a pr3 limit on skunk stage2s