How much does a complete bottom end weigh?

 

well i just bought a COMPLETELY stripped bare block, and it weighed about 75 pounts, so i know thats not what you were looking for but its a starting point.

 

The "BARE" aluminum block weighed 75 lbs?! I find that hard to beleave? Maybe iron block.... I mean i picked up a whole D16 block that was full of pistons and crank, flywheel... and that could not weigh more than 60-80lbs?
The block its self is JUST aluminum?

 

thats according to ups

 

D16 is a mouse compared to the H22, ups is proabably right

 

my bare h22 block weighs 55lbs so maybe with packing it could be 75lbs. i know i can move a h22 bottom end with everything still in it so it cant be over 150lbs

 

My H23 with crank and balance shafts was about 139lbs

 

i shipped off an h22 short block a while ago, and i can guarentee you it weighed more than 75 pounds. fully assembled short block, give or take some things weighed over 100 to be safe.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gedupsound &raquo;</TD></TR><TR><TD CLASS="quote">i shipped off an h22 short block a while ago, and i can guarentee you it weighed more than 75 pounds. fully assembled short block, give or take some things weighed over 100 to be safe.</TD></TR></TABLE>

I agree 100 + - Id say, I'll weigh mine on monday and post

 

FWIW, a complete engine, minus lower exhaust, p/s and a/c, weighs 475lbs, so it's not surprising a short block wouldn't be at least 200lbs.... It's darn heavy!

 

yeah i can lift a complete h22a short block off the ground by myself. Though I can't stand there with it in the air all day long, but you get the idea of how heavy it is.

 

I bought this type-s shortblock. as you can see it is pretty bare but i can lift it. with an oak pallet it was 180# shipping weight.

http://jeff.hybridautomotive.c...9.jpg

this is not my page but i had access to the link. hope it doen't **** off jeff.

The Pirate

 

Anyone know how much the crank weighs?