is this a good d16 set up? please look!
Thread Starter
Joined: Sep 2002
Posts: 1,572
Likes: 0
From: scottsdale, arizona, u.s.a
is this a good d16 set up? please look!
ok so ive been browsing around here and there and i was leaning towards getting the cheap greddy kit for a d16z6.
then i came across this kit on ebay and it looks great! it would be able to produce much more boost then the greddy for about the same price
t-3 turbonics turbo
custom mani
tial 35mm wastegate
Mandrel bent 304 stainless steel intercooler and turbo pipes
intake
Oil supply and drain kit
BOV
Stainless steel downpipes
all for buy it now 1500
take a look http://cgi.ebay.com/ebaymotors...=6755
id need to get intercooler, injectors, vafc, fpr.
would i need a DP?
what am i missing?
overall what do u guys think of it?
TIA
then i came across this kit on ebay and it looks great! it would be able to produce much more boost then the greddy for about the same price
t-3 turbonics turbo
custom mani
tial 35mm wastegate
Mandrel bent 304 stainless steel intercooler and turbo pipes
intake
Oil supply and drain kit
BOV
Stainless steel downpipes
all for buy it now 1500
take a look http://cgi.ebay.com/ebaymotors...=6755
id need to get intercooler, injectors, vafc, fpr.
would i need a DP?
what am i missing?
overall what do u guys think of it?
TIA
Thread Starter
Joined: Sep 2002
Posts: 1,572
Likes: 0
From: scottsdale, arizona, u.s.a
Re: is this a good d16 set up? please look! (B16OnTop)
i would be running the turbopanda set up. supra pistons with remachined b16 rods etc.
the stock sleeves can hold up to 350 or 400 i believe. i think the rods are the weak point in this equation but since turbopanda was boosing 22.... eh i think maybe 17-18psi
im going to make sure i get better rod bolts then the stock b16 ones. i read this huge thread on people boosting with stock rods and stock rod bolts... the bolts being a major problem.
right now im looking for the right blockguard. if ya wanna help me find this GE blockguard for d16z6 that would be greatly apreciated
the stock sleeves can hold up to 350 or 400 i believe. i think the rods are the weak point in this equation but since turbopanda was boosing 22.... eh i think maybe 17-18psi
im going to make sure i get better rod bolts then the stock b16 ones. i read this huge thread on people boosting with stock rods and stock rod bolts... the bolts being a major problem.
right now im looking for the right blockguard. if ya wanna help me find this GE blockguard for d16z6 that would be greatly apreciated
New User
Joined: Jul 2001
Posts: 128
Likes: 0
From: Houma, LA, USA
Re: is this a good d16 set up? please look! (B16OnTop)
http://turbod16.com/ Looks good, the greddy kit is limited on a built motor. The T3 is a good turbo. Ask that question at the link above, also.
Thread Starter
Joined: Sep 2002
Posts: 1,572
Likes: 0
From: scottsdale, arizona, u.s.a
Re: is this a good d16 set up? please look! (MikeExt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MikeExt »</TD></TR><TR><TD CLASS="quote">http://turbod16.com/ Looks good, the greddy kit is limited on a built motor. The T3 is a good turbo. Ask that question at the link above, also.</TD></TR></TABLE>
hey man thanx alot!
hey man thanx alot!
Thread
Thread Starter
Forum
Replies
Last Post
brandnewman16
Classifieds: Forced Induction
4
May 13, 2008 02:03 PM
Vp Special K
Forced Induction
33
Apr 23, 2005 08:28 PM