My first time at the track ever. What an experience
This was a crowded day, we only get 3 runs. I was so nervous...i saw this old muscle car snap it's rear axle, i felt bad...but anyways here are my slips:
Run #1: I realized that launching on the street and at the track are different. I avoided the water box, and did a small short burn out to clean my tires off...then i dropped at like 3,500 with 33 psi on the front tires.
Run#2: Driver front tire at 25 psi, passenger front at 23...dropped at 4, i got some agressive wheel hop but surprisingly this was my fastest run till i hit the goddamn shift gate between 1st and 3rd and so i screwed that run up..but i still managed to run a 15.085...dammit that was supposed to be my best run!!!
Run#3: I was concentrating too hard on the launch i think i launced around 5 or somethuing i got sever wheel hop, and i thought i had broken into the 14s..but not to be, i got a 15.000. Come on God, stop teasing me
Now, i dont know anything about 60's and trap speeds but im told a good 60 is like 2.3 and lower? And that my trap speeds were pretty good despite 15.xxx...
any advice on launching better? i see some people are running mid 14s...
I ran full interior (w/o the spare tho)
oh yeah, i am stock except for the AEM CAI which i think i'll take sgt's advice and sell and just use the stock box w/ a kn filter
[Modified by NBP ITR 01-622, 7:45 AM 8/23/2001]
Run #1: I realized that launching on the street and at the track are different. I avoided the water box, and did a small short burn out to clean my tires off...then i dropped at like 3,500 with 33 psi on the front tires.
Run#2: Driver front tire at 25 psi, passenger front at 23...dropped at 4, i got some agressive wheel hop but surprisingly this was my fastest run till i hit the goddamn shift gate between 1st and 3rd and so i screwed that run up..but i still managed to run a 15.085...dammit that was supposed to be my best run!!!
Run#3: I was concentrating too hard on the launch i think i launced around 5 or somethuing i got sever wheel hop, and i thought i had broken into the 14s..but not to be, i got a 15.000. Come on God, stop teasing me
Now, i dont know anything about 60's and trap speeds but im told a good 60 is like 2.3 and lower? And that my trap speeds were pretty good despite 15.xxx...
any advice on launching better? i see some people are running mid 14s...
I ran full interior (w/o the spare tho)
oh yeah, i am stock except for the AEM CAI which i think i'll take sgt's advice and sell and just use the stock box w/ a kn filter
[Modified by NBP ITR 01-622, 7:45 AM 8/23/2001]
I forgot more about hondas then you will ever know....
Joined: Feb 2001
Posts: 5,310
Likes: 1
From: hop,skip, and a jump from the city,, new friggin york, USA
hey nbp, that's pretty good. now i don't feel so bad for running a 14.6 in my hybrid my first time out. people are going to say **** like "that sucks" or "why didn't you do this or that" and "you need...." don't worry, it's cool. you'll get it. this time around i am going to the dyno to find out where i make the most power, then set my shift light at that rpm. i was shifting way late, where i made about 120hp...oops. it's cool, good job bro
thanks rodney...im goind down to island tommorow (friday) to try to break in to the 14s...as im told a 97 trap speed is like a mid to low 14 trap speed so maybe if i figoure out how to launch tommorow i'll beat ur puny 14.6 hehe j/k
Nice trap speeds. Work on your 60ft time, drop the tire pressure a bit or get some drag radials. Most of all keep praticing.
your 60ft was good on your 2nd run, if it would have been a clean run you would have been in the 14's easy. Wheel hop is bad, try feathering the clutch a little instead of just dropping it. Its more productive and it won't hurt your car as much.
yeah i usually feather it i think from all the nervousness and adrenaline i was just dropping it and i wasn't even really thinking i was just sitting there...i'll let u guys know how i do tommorow!
Trending Topics
"yeah i usually feather it i think from all the nervousness and adrenaline i was just dropping it and i wasn't even really thinking i was just sitting there...i'll let u guys know how i do tommorow! "
know what yah mean, you did fine for your 1st runs
know what yah mean, you did fine for your 1st runs
Thread
Thread Starter
Forum
Replies
Last Post
slooogsr
Forced Induction
12
May 22, 2007 08:10 AM
PM-Performance
Forced Induction
35
Jun 11, 2003 12:27 PM
HyperPrinting
Acura RSX DC5 & Honda Civic EP3
11
Jul 20, 2002 09:02 AM



