Yes I have a B16 with a Clutch Specialties Dual Diaphram Pressure Plate and 6 Puck Cluth. I have been driving it for about 20K Miles. Yesterday I was driving and The clutch pedal went to the Floor. I Dropped the Tranny today to find the Clutch Fork was broken. Has anyone ever run into this problem. has anyone ever Made thier own more Beefy? If so how Thankx in advance


Modified by 98EK4 at 9:04 PM 9/18/2003

 

Bump

 

ANYONE

 

B18C5-EH2 had this happened to him

 

i have seen it happen lots of times.

buy a new one, no one offers a beefier version....

also i would look into a different pressure plate

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98EK4 &raquo;</TD></TR><TR><TD CLASS="quote">Yes I have a B16 with a Clutch Specialties Dual Diaphram Pressure Plate and 6 Puck Cluth. I have been driving it for about 20K Miles. Yesterday I was driving and The clutch pedal went to the Floor. I Dropped the Tranny today to find the Clutch Fork was broken. Has anyone ever run into this problem. has anyone ever Made thier own more Beefy? If so how Thankx in advance


Modified by 98EK4 at 9:04 PM 9/18/2003</TD></TR></TABLE>

just wanted to say this is basically my same situation. same pressure plate. and the picture represents my clutch fork currently. look out for clutch specialties pressure plates!

EDIT: i have the stage 2 extreme clutch/pressure plate


Modified by sol2nr at 9:51 AM 9/25/2004

 

damn i have the same clutch(dual diaphragm) with the solid street disc. hope this doesn't happen to me.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jawad &raquo;</TD></TR><TR><TD CLASS="quote">B18C5-EH2 had this happened to him</TD></TR></TABLE>

I remeber on some post that he welded additonal beam to make it stronger.

Looks effective

PM him.

 

have the new one cryo treated. if you have a good place local its a very cheap way of increasing the strength significantly.

 

yep its happened to my friend with a sohc turbo hatch....they ended up reinforcing it with more metal and its holding up well so far.

Here's the car and a pointless pic...but just had to share the great *** this chick has. lol...


He actually takes it pretty easy on the streets and beats on the car at the tracks. Oddly enough.....it broke on the streets under normal driving.

 

i had this happen to me before i had a 2001 itr motor with act hd pp and 6 puck unsprung disc. the exact samething happened to me.