i am now a gross polluter
went in today to smog my b16a but guess it cant pass! ran a cat and HEET too.

HC
15mph
134max
265meas

25mph
108max
248meas

CO
15mph
0.82max
2.77meas

25mph
0.71max
2.65meas

NO
15mph
847max
1834meas

25mph
786max
2069meas

RESULTS: Gross polutter!!

on a bright note, passed visual like nothing

 

you son-of-a-bitch

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 22lbGS-R &raquo;</TD></TR><TR><TD CLASS="quote">you son-of-a-bitch</TD></TR></TABLE>

hahahah...well i think most of us have been gross poluters at one point in time right?

BTW is that a certified B16 swap?

 

wuts a certified swap?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1.fast.festiva. &raquo;</TD></TR><TR><TD CLASS="quote">wuts a certified swap? </TD></TR></TABLE>

Hahah, I can't tell if you are serious or not.

A certified swap is a legalized swap.

 

jdm motor with all emissions hooked up.

 

u need a new cat buy those numbers (possibly 02 sensor) is the ecu you have chipped ? i had a chipped p28 ecu my car failed bad , put a new cat and stock ecu , retarded the timing a few degres and passed

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92lsr &raquo;</TD></TR><TR><TD CLASS="quote">u need a new cat buy those numbers (possibly 02 sensor) is the ecu you have chipped ? i had a chipped p28 ecu my car failed bad , put a new cat and stock ecu , retarded the timing a few degres and passed </TD></TR></TABLE>

i got the mugen chip on mine that only runs 1 o2 sensor so if i go to a stock pr3 would i just need to wire up the 2nd o2 sensor somehow? is it that easy or am i missing something? very curious. dont have smog till 11 months but it'll get here eventually

 

hehe.

did you expect to pass or something..?