Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 34
Likes: 0
From: Wellington, FL, USA
Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head
Let's try this again
84mm Benson Sleeved Block
Custom 84mm CP Piston 10:1 compression
PortFlow Head
Modified by TurboAce at 11:32 PM 9/13/2003
Modified by TurboAce at 12:04 AM 9/14/2003
84mm Benson Sleeved Block
Custom 84mm CP Piston 10:1 compression
PortFlow Head
Modified by TurboAce at 11:32 PM 9/13/2003
Modified by TurboAce at 12:04 AM 9/14/2003
Honda-Tech Member
Joined: Jul 2002
Posts: 1,860
Likes: 0
From: Dallas, Tx, USA
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (TurboAce)
gotta remove the .orig.jpg
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboAce »</TD></TR><TR><TD CLASS="quote">Let try this again
84mm Benson Sleeved Block
Custom 84mm CP Piston 10:1 compression
PortFlow Head
</TD></TR></TABLE>
removed em for ya
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboAce »</TD></TR><TR><TD CLASS="quote">Let try this again
84mm Benson Sleeved Block
Custom 84mm CP Piston 10:1 compression
PortFlow Head
</TD></TR></TABLE>
removed em for ya
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 34
Likes: 0
From: Wellington, FL, USA
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (Foozball26)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Foozball26 »</TD></TR><TR><TD CLASS="quote">gotta remove the .orig.jpg
removed em for ya</TD></TR></TABLE>
thanks finally understand how to post pics
removed em for ya</TD></TR></TABLE>
thanks finally understand how to post pics
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 34
Likes: 0
From: Wellington, FL, USA
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (NA gs-R 05 C)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NA gs-R 05 C »</TD></TR><TR><TD CLASS="quote">freaking sweet. 
when is it all going to be put together ?</TD></TR></TABLE>
I just waiting for the Pauter rods to come in. Hopefully it will be sometime early next week.
when is it all going to be put together ?</TD></TR></TABLE>I just waiting for the Pauter rods to come in. Hopefully it will be sometime early next week.
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 34
Likes: 0
From: Wellington, FL, USA
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (30psiCiv)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 30psiCiv »</TD></TR><TR><TD CLASS="quote">Wow, are those granite counter tops?</TD></TR></TABLE>
Yes they are!!! It's looks better in person.
Yes they are!!! It's looks better in person.
Honda-Tech Member
Joined: Mar 2002
Posts: 14,296
Likes: 1
From: Charleston, SC
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (TurboAce)
Granite is the way to go. Im actually redoing my parents kitchen in 12x12 pieces of granite. CP pistons are bad ***, those are what I am running as well.
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 34
Likes: 0
From: Wellington, FL, USA
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (Hatch4urSnatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hatch4urSnatch »</TD></TR><TR><TD CLASS="quote">
is this sleeve lightly scored? </TD></TR></TABLE>
I hope not, that is how it looked when I got it back from Earl.
is this sleeve lightly scored? </TD></TR></TABLE>
I hope not, that is how it looked when I got it back from Earl.
Honda-Tech Member
Joined: Aug 2003
Posts: 5,250
Likes: 0
From: Tuscaloosa, Al, usa
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (GudeH23a)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GudeH23a »</TD></TR><TR><TD CLASS="quote">Granite is the way to go. Im actually redoing my parents kitchen in 12x12 pieces of granite. CP pistons are bad ***, those are what I am running as well. </TD></TR></TABLE>
I am actually building a new home and we are using UbaTuba granite.
Maybe that is just a mark from someones finger, surely not a score in a new sleeve. It looks as it was honed properly.
</TD></TR></TABLE>I am actually building a new home and we are using UbaTuba granite.
Maybe that is just a mark from someones finger, surely not a score in a new sleeve. It looks as it was honed properly.
Honda-Tech Member
Joined: Feb 2003
Posts: 794
Likes: 0
From: Duncannon, PA
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (TurboAce)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboAce »</TD></TR><TR><TD CLASS="quote">
I hope not, that is how it looked when I got it back from Earl.</TD></TR></TABLE>
That looks like it is from a dial bore gauge.....just look at it as proof that earl made sure your block was perfect 
I hope not, that is how it looked when I got it back from Earl.</TD></TR></TABLE>
That looks like it is from a dial bore gauge.....just look at it as proof that earl made sure your block was perfect
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 34
Likes: 0
From: Wellington, FL, USA
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (Tinker219)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tinker219 »</TD></TR><TR><TD CLASS="quote">Looks very clean! What kind of #s you shooting for?</TD></TR></TABLE>
I'm hoping for somewhere in the 500hp range. Once I break in the engine I'll start reseaching parts for my turbo kit and fuel system. I might give you a shout when it comes to the manifold.
I'm hoping for somewhere in the 500hp range. Once I break in the engine I'll start reseaching parts for my turbo kit and fuel system. I might give you a shout when it comes to the manifold.
Honda-Tech Member
Joined: Jun 2001
Posts: 8,120
Likes: 3
From: Irvine, CA, usa
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (TurboAce)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboAce »</TD></TR><TR><TD CLASS="quote">
I hope not, that is how it looked when I got it back from Earl.</TD></TR></TABLE>
Perfect for ring break in
I hope not, that is how it looked when I got it back from Earl.</TD></TR></TABLE>
Perfect for ring break in
Sweet setup too 
Honda-Tech Member
Joined: Apr 2003
Posts: 2,363
Likes: 0
From: West Chester, Pennsylvania
Re: Finally Pictures of my Benson Sleeves, CP Piston and Portflow Head (TurboAce)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboAce »</TD></TR><TR><TD CLASS="quote">
Yes they are!!! It's looks better in person.
</TD></TR></TABLE>
They look good. I used to work with that type of material.
Good luck with the motor.
What is the rest of your set up?
Yes they are!!! It's looks better in person.
</TD></TR></TABLE>
They look good. I used to work with that type of material.
Good luck with the motor.
What is the rest of your set up?