JDM Integra R Golden Eagle sleeved block (56k warning)
Thread Starter
Member
Joined: Jun 2002
Posts: 1,172
Likes: 0
From: TX, USA
JDM Integra R Golden Eagle sleeved block (56k warning)
alright guys, up for sale is a JDM B18C ITR block. there are 0 miles on the sleeves. the sleeves are o-ringed and decked, stock 81mm bore. this block can be bored up to 85mm or 86mm i think. block comes with basically everything except pistons or rods. comes with crank, oil pickup, windage tray, main caps, used pumps, etc. this block was purchased from st00pid when it was stock. the block has been shaved because of previous turbo kit that was installed on there before.
here are the pics:
$1200 FIRM
if your interested, contact me via here, AIM: lilxvtecxpwr, or (281)650-2598 ask for don.
thanks.
here are the pics:
$1200 FIRM
if your interested, contact me via here, AIM: lilxvtecxpwr, or (281)650-2598 ask for don.
thanks.
Trending Topics
Honda-Tech Member
Joined: Apr 2002
Posts: 1,676
Likes: 0
From: westminster OC, south cali, usa
Re: (HavokRacing)
still have the block? im interested... just gotta check my expenses and funds to weigh things out. all ill probably need for this is the pistons, rods, headstuds, bearings, and misc things like timing belt, pumps, etc right? so like 2000 will be most likely enough for it to be complete if i already have my head and things from my block...
i have a usdm gsr, so i should be fine correct? someone point me in the right direction. i was planning to re-do my gsr block, but this is a pretty good deal. papers available?
krazy
i have a usdm gsr, so i should be fine correct? someone point me in the right direction. i was planning to re-do my gsr block, but this is a pretty good deal. papers available?
krazy
Honda-Tech Member
Joined: Feb 2001
Posts: 1,376
Likes: 0
From: Land of Fully Built Blocks
Re: JDM Integra R Golden Eagle sleeved block (lilxvtecxpwr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lilxvtecxpwr »</TD></TR><TR><TD CLASS="quote">alright guys, up for sale is a JDM B18C ITR block. </TD></TR></TABLE>
Not anymore!
Sold to me late this evening. Thanks for all of your help Don!
I look forward to a visit from my UPS man!
Not anymore!
Sold to me late this evening. Thanks for all of your help Don!
I look forward to a visit from my UPS man!
Honda-Tech Member
Joined: Jul 2001
Posts: 6,030
Likes: 0
From: Northeast, USA
Re: JDM Integra R Golden Eagle sleeved block (krazy)
I have a similar block for sale... 900 miles on it. GE sleeved, BUT it's fully assembled with JE 9:1 pistons, Eagle rods, all new pumps, seals, gaskets, etc... the block originally was a '98 GSR shortblock with no damage or shaving.
I'm accepting first $2500 completely ready to drop into a vehicle. Oil pan has return pipe for oil welded in as well. Polk Performance was responsible for all parts and assembly. Excellent work.
PM me.
- Louis
I'm accepting first $2500 completely ready to drop into a vehicle. Oil pan has return pipe for oil welded in as well. Polk Performance was responsible for all parts and assembly. Excellent work.
PM me.
- Louis
Thread
Thread Starter
Forum
Replies
Last Post
TurboTegB18c
Classifieds: Forced Induction
7
Apr 4, 2003 07:14 AM
Civicdrgrcr
Forced Induction
2
Nov 19, 2002 03:00 AM