Just curious about turbo b16's. Post your times and specs.

 

Good friend of mine just ran 13.5 at 101. 22" Slicks, non intercooled T3/T04B, B16A2 in a 92 hatch, 8psi.

 

Well just got back from the dyno tonight and car is not fully tuned yet, just prelim #s with it breaking up which we shall fix hopefully tomorrow trace the problem and fix it. But so far 571.8whp and 354.1 ft-lb torque 25psi B16A 84mm Darton Sleeved BABY! WIll post #s when we are DONE.

 

Ok showoff. Go fix the problem and report back.

 

14.1@94 MPH. Full interior 99 Si, A/C, Nissan T3 turbo 9psi. Cracked a ringland.

 

dyno numbers- I've seen intercooled fmu kits make 205-240whp on a b16 w/stock bottom end
1/4 mile- low 14's to mid to low 13's @101-109mph on street tires on a stock bottom end



Modified by martinscott at 8:09 PM 9/2/2003

 

sir 2 put down 276whp @11psi ran a 12.94 at a crappy track and blew at the top of third, and with my tranny and my 24.5 slicks it should have pulled out the back around 7600 in fourth...........this was in a 92 si full interior, leather seats and power doors, no idea what it weighs but it's not light