Turbo b16a2.... post your 1/4 times or dyno specs.
09-02-2003, 05:12 PM
#2
Honda-Tech Member
Join Date: May 2001
Location: Tallahassee, FL, US
Posts: 7,190
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo b16a2.... post your 1/4 times or dyno specs. (awalk2005)
Good friend of mine just ran 13.5 at 101. 22" Slicks, non intercooled T3/T04B, B16A2 in a 92 hatch, 8psi.
09-02-2003, 06:08 PM
#3
New User
Join Date: Mar 2001
Posts: 12,296
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo b16a2.... post your 1/4 times or dyno specs. (awalk2005)
Well just got back from the dyno tonight and car is not fully tuned yet, just prelim #s with it breaking up which we shall fix hopefully tomorrow trace the problem and fix it. But so far 571.8whp and 354.1 ft-lb torque 25psi B16A 84mm Darton Sleeved BABY! WIll post #s when we are DONE.
Go fix the problem and report back. 
09-02-2003, 08:48 PM
#6
Join Date: Aug 2003
Location: honolulu, hi
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo b16a2.... post your 1/4 times or dyno specs. (awalk2005)
dyno numbers- I've seen intercooled fmu kits make 205-240whp on a b16 w/stock bottom end
1/4 mile- low 14's to mid to low 13's @101-109mph on street tires on a stock bottom end
Modified by martinscott at 8:09 PM 9/2/2003
1/4 mile- low 14's to mid to low 13's @101-109mph on street tires on a stock bottom end
Modified by martinscott at 8:09 PM 9/2/2003
09-02-2003, 10:25 PM
#7
Honda-Tech Member
Join Date: Nov 2002
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo b16a2.... post your 1/4 times or dyno specs. (martinscott)
sir 2 put down 276whp @11psi ran a 12.94 at a crappy track and blew at the top of third, and with my tranny and my 24.5 slicks it should have pulled out the back around 7600 in fourth...........this was in a 92 si full interior, leather seats and power doors, no idea what it weighs but it's not light
Thread
Thread Starter
Forum
Replies
Last Post
Smokin_S2K
Forced Induction
2
05-20-2002 01:22 PM
OneThirtyEight
Forced Induction
3
06-27-2001 06:11 PM
