FYI-the wiring I did on the DX-Mpfi swap is correct. I had the car running but needed to replace the clutch and tranny. Heres my problem:
I have three open wires left and no diagrams to help. Ive checked all the possible websites and no1 has a diagram of the wires.
#1 Green wire by firewall-Im pretty sure this connects to the o2 sensor, since that is green as well......
#2 Black wire that is located on one dizzy plug near the two tranny wires for reverse....
#3 Red wire next to the green plug that goes to the radiator and is connected to tranny ground/white plug/and leads to the fuse box on the strut tower.
If anyone could provide pics of their swap and where these wires go or just look at it and tell me I would appreciate it..... <-ME!!!!(I in the honduh crew!)

 

up