I need to know what size slicks to get, and what size will fit in my wheel well. I have a 92 integra that will be pushing somewhere between 400-500 whp. I have a cable GSR trans with gearing as such 1st-3.307 2nd-2.105 3rd-1.458 4th-1.107 FD-4.40. I will be revving to about 9200rpm. Thanks guys. I'm lookin to run low 11's to high 10's.

 

my opinion


24.5x8.5x13
or 25x8x13

get a set of 13 inch bogarts or weld wheels to mount them on.

dont forget extended wheel studs.

 

extended ARP wheel studs are on the way. and i'm prally gonna get Weld rims. do i want a 13inch rim or 15? and how big of a slick will even fit in my wheel well?

 

i would go with a 13 inch wheel unless you eventually plan on going to 26's or even 28's.....the 13 inch gives you more sidewall to play with.

i bet if ya jacked up the car pretty high you could barely fit a 26. but you should be able to fit a 25 with no problems.

 

a 13 inch rim will fit no problem with a stock rotor? how wide can i go? i was thinkin about like a 9.2. which would be better 25x9x13 or 25x9x15 i don't need a specific offset or anything?