Hey guys.

We just installed a VAFC II into a customers RSX and took some pics and did a write up to help you guys who are do-it-yourselfers.

The how-to can be found here:

http://www.prostreetonline.com...I.asp

Hope this helps you guys!

 

you're using crimp connectors ?

wow.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doctor CorteZ &raquo;</TD></TR><TR><TD CLASS="quote">you're using crimp connectors ?

wow.</TD></TR></TABLE>

I've installed stereos with worse

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RJ &raquo;</TD></TR><TR><TD CLASS="quote">

I've installed stereos with worse </TD></TR></TABLE>

stereos and piggyback fuel controllers are two different things entirely....

Yo...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doctor CorteZ &raquo;</TD></TR><TR><TD CLASS="quote">stereos and piggyback fuel controllers are two different things entirely....

Yo...</TD></TR></TABLE>

what about ne0nz? My LED washer n0zzle installation is holding up good...

 

: burn :

 

No, we solder all of our connections. However, for the sake of the writeup, we showed people an easy way to do it, and specifically say: crimp connectors / solder. So people don't *have* to solder if they don't want, but of course we recommend solder.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prostreetonline &raquo;</TD></TR><TR><TD CLASS="quote">but of course we recommend solder.</TD></TR></TABLE>

gUUd stuff mang.

 

Whats the difference between the original VAFC and the VAFC II. Looks like the controls are different. I want to change the timing. Can the VAFC II do that?