Hey guys, I'm doing a single package deal for any B series motored car (preferably a Civic or an Integra)
After a guy paid me up front for the parts, and I finally got them all together he found out his wife was having a baby and has asked me for his money back. Me being understandably considerate told him only if I could sell his parts to someone else since I could not return them.
So here is what all you will get...

<U>Parts:</U> All parts are brand new!

Precision 60-1
Walbro In tank 255hp
Rev Hard manifold
Tial 50mm gunmetal grey BOV
Tial 38mm gunmetal grey wastegate
Custom fit mandrel bent tig welded piping intercooler, downpipe, dump tube, etc.
Misc. turbo flanges
Black hose couplings
550 RC injectors
MSD 6AL
Custom made braided SS oil supply and return hoses
Fittings for oil lines
Misc. Hardware (clamps, vacuum hose, fittings, etc.)
Intercooler (size depends on application)
Clips for injectors
K&N air filter
Hondata (S100 with boost option in a P28 ECU can do an S200 instead for slightly more)

<U>Labor:</U>

Professionally done by Attitude Racing (builds fastest street Hondas/Acuras in/near Houston! builder/sponsor of "GSREV's" silver hatch that has been 10.8 @138mph blowing the tires away into 3rd! "Stoopid" drove it to a 10.8 @ 116mph after letting off at the 1000'!!! Car just took 2nd at the NHRA event in Dallas, went 11.4s through the restrictive exhaust in near 100deg. temps!)

Turbo Install (all related parts)
Build and install custom piping to fit your car
Build and install custom downpipe and couple to exhaust
Swap out fuel pumps
Swap out injectors
Wire in injector clips
Install and wire in ignition
Install Hondata with a base map

I'm starting the bid out at $5k check around and see what all this would cost you at a reputable shop! (about $8k and not near the quality of work!!!)
I will accept Paypal!
1/2 $ up front!
Get it before it goes on ebay for more!
Many references upon request, or ask around on HT





Modified by Mochanic at 1:42 AM 8/14/2003

 

Are you parting it out? If so, im was wondering what model Precision turbo it was and specs? also, what bolt pattern and size the downpipe was?

 

no, I will not part this out!
The downpipe has not been made yet, it will be to the customers likes.
the turbo is a 60-1 T3-T4e .69 a/r.
Let me or Alex know, I can build you a custom downpipe that you will love!!!

Randy

 

5k is a damn good price. ill sell you my soul for it, and a cpl other ppl's too. goodluck sir.

 

PM'd you!

 

bump

 

your other thread got locked so i couldnt reply. haha, together anythings possible. ill be paying you a visit soon as i come back from the blood bank . 700 hp and 2pints later.


someone buy this kit, the price and quality can not be beat, guranteed. hes even an ok guy ..the best.

 

damn Roby, now your selling your blood to buy more hp?
thanks for the kind words, and support!

 

 

did u get my PM?