need a tranny!!!!
Trending Topics
If you want to re-use the clutch disc and plate set-up you already have, I have a JDM ZC that is 21 spline (1988) for sale. It has never been used here in the U.S. Its part of my JDM inventory. ( you must use B-series 88-89 Integra axles)
OR.....
I have a 91 US "SI" tranny from a 91 Hatchback but you cannot re-use your '88 clutch set-up. You will need a 20 spline clutch disc and matching flywheel and pressure plate. Heck, I can give you the (bigger) 89+up Civic/CRX clutch, flywheel, etc. if you end up buying the SI tranny.
I swap many B-series, so I have some perfect D series items around the shop
Contact me if you are serious. I can ship if needed.
OR.....
I have a 91 US "SI" tranny from a 91 Hatchback but you cannot re-use your '88 clutch set-up. You will need a 20 spline clutch disc and matching flywheel and pressure plate. Heck, I can give you the (bigger) 89+up Civic/CRX clutch, flywheel, etc. if you end up buying the SI tranny.
I swap many B-series, so I have some perfect D series items around the shop
Contact me if you are serious. I can ship if needed.
hey how much do you want for you si tranny... cause if it comes with the clutch flywheel etc i can do it.... i just dont wanna mess with buying new axles and stuff... how many miles do you have on the tranny? oh and how many on the zc? and are the gearing ratios of the zc the same as the si tranny? get back with me or email me at thebadbee_88crx_si_zc@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
Red_Si
Honda CRX / EF Civic (1988 - 1991)
1
Dec 25, 2004 11:24 PM





