Ok I have about $1000 to play with and I am trying to decide what mod to do next here are the choices I can get 1 or a combo of a couple what would you do?

1. Recaro speed seats with rails and sliders = $1000
2. Rota 16x7 circuit 8's with tires= $750
3. Spoon style front lip= $200
4. Duck Bill (non carbon fiber)=$125
5. Tein SS coilovers=$875
6. Rear lower control arms from BodykitsNW=$175
7. SRR rear lower control arms, lower tie bar and sway bar kit=$400
8. Ground control or Skunk2 with Kyb Agx= $650
9. Front and Rear 99 si Brakes= 470

Well those are all I can think of now. (Some of the prices I did the average for)
Thanks again


Modified by Nerv2g at 6:21 PM 8/9/2003

 

what car?
What are your current mods?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POS Hatchback &raquo;</TD></TR><TR><TD CLASS="quote">what car?
What are your current mods?</TD></TR></TABLE>

 

Sh@t sorry about that.

Car: 92 vx hatchback
Motor: B18C6 euro itr
Mods: Aem short ram intake, JDM 4-1 header, Buddy club spec III exhaust, Act HD pressure plate with 6 puck disk, Zex 10.4 pound flywheel, DC sports short shifter and Kenji p28 ecu chipped for optimal ITR specs.

Thanks again

 

tein coilovers

 

If I had the cash I'd save up a little more and go with #7 and #8.... that's pretty close to what I have planned actually.

 

tein coilovers then save for the rotas

 

Yeah 7 and 8 vs. the tein is definatley a hard one.

 

i would go 5 and then save more and then 7

i was just wondering how come you put the non carbon fiber duckbill

 

Well I was originally gonna go that route carbon fiber lip, duckbill, mirrors, carbon fiber hood and then some black rims. I have grey metallic paint job and I have seen a couple hatchs that look like that and I was not to crazy about them especially the rims. So I decided to keep the body all one color. Thanks for the reply

 

2

 

id go with ground controls and the srr rear suspension package, itll do more for you than a set of teins

 

spoon lip with skunk2 coils and kyb setup.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nerv2g &raquo;</TD></TR><TR><TD CLASS="quote">Ok I have about $1000 to play with and I am trying to decide what mod to do next here are the choices I can get 1 or a combo of a couple what would you do?

1. Recaro speed seats with rails and sliders = $1000
2. Rota 16x7 circuit 8's with tires= $750
3. Spoon style front lip= $200
4. Duck Bill (non carbon fiber)=$125
5. Tein SS coilovers=$875
6. Rear lower control arms from BodykitsNW=$175
7. SRR rear lower control arms, lower tie bar and sway bar kit=$400
8. Ground control or Skunk2 with Kyb Agx= $650
9. Front and Rear 99 si Brakes= 470

Well those are all I can think of now. (Some of the prices I did the average for)
Thanks again</TD></TR></TABLE>

it seems to me you have a total sleeper. i would say screw all of those and get more internals for your engine. maybe some cams, sprokets retainers and springs??

if you dont want that sleeper look, i would go with the tein SS w/ a carbing 3 point strut bar.

 

tein and the CF LIP

 

Well before I do anymore work to the engine I want to get some better brakes #9. The only thing holding me back is that shipping #9 over to me in Germany will cost a fortune.

 

super sleeper man, stock rims, stock ride height, i would go turbo

 

can you tell me where you are getting rota 16s + tires for 750
bucks? thanks

 

suspension!!

 

I would do 7 and 8

 

Teins you dummy

 

I was leaning towards the teins and the Rear LCA's. Only one probelm though SRR or BodykitsNW LCA's are not made for the ITR rear LCA's (which I wil need to run the Tein's)
So now I am leaning towards 7 & 8 because my stock rear LCA's look like pool sticks.