Modified by Bryant at 1:07 AM 1/13/2004

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bryant &raquo;</TD></TR><TR><TD CLASS="quote">Do some how I have GSR rear calipers on my five lug convertion?</TD></TR></TABLE>
sorry, I don't quite understand what you're asking. Could you rephrase the question?

yshi - who read it five times but couldn't figure it out

 

Look like GSR/LS rear calipers and pads to me. Sucks man, definately get in touch with that seller.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedlinedVTEC &raquo;</TD></TR><TR><TD CLASS="quote">Look like GSR/LS rear calipers and pads to me. Sucks man, definately get in touch with that seller.</TD></TR></TABLE>

Ya, they definitely look like GSR rear calipers. ITR calipers should be slightly bigger than that. Obviously by the pads and such too they are bigger in size.

That's odd as hell GSR rear calipers were put on the 5 lug, unless they did the conversion the cheap way (buying the hub, rotor, etc.).

If the seller didn't know or what not, that's not really an excuse, they should still refund you some money in that case because what they advertise as full 5 lug conversion, should be the FULL, not "I didn't know the calipers were wrong" type deal.

Just FYI man I have your back.

 

Whats up Bryant. I know you are friends w/Brandon, anyway. I live in UT as well, I have a 97 ITR and I could pull the part #'s for you just for reference...

I went to do it now but I don't have a damn flashlight, lemme know if you need anymore help.

Also, that part # on the pic above looks familiar....any possibility these could be 96 4lug ITR calipers?? You may want to sift through this thread here.

https://honda-tech.com/zerothread?id=514109


Modified by DsR at 10:46 PM 8/5/2003

 

I think I have pics of D's rear brakes. I'll post 'em up.

 

Don't 97 ITRs have different rear calipers than 98 and 00-01 ITRs?


I know I've seen different pad part numbers for ITR rears, so there must've been a change somewhere.

 

I remember reading that as well..Im going to go grab my #'s real quick.

OK, got some pics...but w/a chitty camera phone, however. none of your part #'s are on my calipers whatsoever. and if 98+ ITR pads don't fit, they can not be 98 calipers... and now we know they are not 97's

D who is leaning towards 96 ITR calipers, but is going to go find verification

here are the pics.
It does have the bigger piece that you circled above.



but, none of the part #'s you have.






Modified by DsR at 2:31 PM 8/6/2003

 

Ok, found your part #...according to Koala Yummies, they are GSR/ITR rear calipers...

https://honda-tech.com/zerothread?id=509987

I was looking to buy a JDM 96 ITR previously, and I know for sure Koala Yummies has the ITR 4lug swap.. so they may be 96 ITR like I assumed, But it looks like they are GSR as Brandon stated...

Better talk to the seller..

 

Well, according to Koala Yummies...they are GSR for sure, possibly 96 4lug ITR, which are possibly the same.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DsR &raquo;</TD></TR><TR><TD CLASS="quote">they are GSR for sure, possibly 96 4lug ITR, which are possibly the same.</TD></TR></TABLE>

Same thing.