Hey guys, I did a ton of major research about my topic .
I got everything I thougth i need to complete my setup.

My setup is:
D16Y8
Greddy TD04H-15G Turbo
Greddy Type 31 intercooler
Greddy Type S blow off valve
Greddy manifold
HKS EVC EZ electronic boost controller
3" custom exhaust
ZR1 sports clutch
AEM COLD AIR INTAKE with BY-Pass
Hondata S200
OBD I ECU
OBD I ECU with harness converstion
Walbro 255 LPH Fuel Pump
440cc RC Saturated injectors or bigger

I'm getting the ecu tuned by a shop.

I was about install the turbo (by a shop also) untill I was told that I wasn't ready and that I needed more stuff. I was wanting to run about 9-10 psi.

I would greatly apperciate it if you guys could help me.Thanks

 

What is the CAI for? You need oil lines also.

 

the CAI was teh first mod I had.. I didnt' have a turbo in mind. How much oil lines or where can I get some.

 

i think ur ready to run 9 or 10 psi just get it tuned

 

you need a feed and a return. You also need to tap the oil pan for the return. ther are parts list on the board for every piece you need, you might need a few extra though...i haven't seen the way the lines hook up to the turbo itself.

 

how about a 2.5" Downpipe and ur Hondata S200 should by S200b for boost

I dont know if i saw, but youll need OBD1 Injector clips for ur RC's.

Contact Stan for Oil feed/return lines, he sells a full set.

- Fred

 

maybe a fpr

 

what about yoru catylic convertor?

 

From your list you are missing downpipe, interooler piping, and fuel lines.

 

Sorry, I forgot to list a few other parts that I had. They are:
Greddy intercooler piping
internal wastegate
Downpipe
Missing Link
Oil feed and return lines -All hoses
vacuum tees
silicone couplers
hose clamps

Do i still need to mess with taping the oil pan or am I ready to install?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FredoSP &raquo;</TD></TR><TR><TD CLASS="quote">Contact Stan for Oil feed/return lines, he sells a full set.</TD></TR></TABLE>

How can I get in touch with Stan?

Thanks guys

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RNPoo7 &raquo;</TD></TR><TR><TD CLASS="quote">
How can I get in touch with Stan?

Thanks guys </TD></TR></TABLE>

Pm him Flamenco-T he's sold hundreds of kits here on honda-tech

 

Thanks guys, I think I am quite ready now.
I just need to go buy a hondata and then soon to be turbocharged