14b oil return/feed questions
Thread Starter
Joined: Oct 2002
Posts: 301
Likes: 0
From: va. beach, va
14b oil return/feed questions
ok, im using a 14b on my z6 turbo project. question is, does anyone know the fitting size for the return? also, i have the stock feed line banjo fitting, should i use that, or use an NPT fitting?
Honda-Tech Member
Joined: Feb 2001
Posts: 6,351
Likes: 0
From: Tejas
Re: 14b oil return/feed questions (sk8rmike)
Most return on 14B used a steel tube drain flange from the factory.
On the oil feed you can use an inverted flare to -3AN fitting and run a -3AN for the feed line. I sell complete kits for 14B for both oil feed and oil return.
PM me if intersted in pricing
stan
stan@fast-turbo.com
On the oil feed you can use an inverted flare to -3AN fitting and run a -3AN for the feed line. I sell complete kits for 14B for both oil feed and oil return.
PM me if intersted in pricing
stan
stan@fast-turbo.com
Thread
Thread Starter
Forum
Replies
Last Post
Del_Slowest
Forced Induction
11
Nov 27, 2003 09:07 AM
