well, got bored this weekend , and a friend and i ripped out the welder.

here is what we came up with



to see all the pics of the project click here.
http://pwtuning.com/project_ca...iping/

if anyone has this inercooler and would like us to make piping please contact me.

platinum.

 

looks good. i dunno how well those home depot connectors will hold up.

 

nice i painted my pipes gold though.. i like the red as well

 

hehe, good eye.

those home depots where my only hope till my new atp ones come in.

they blow off after about 3 runs at 10psi.. hehe. they suck..

1st time in blew off i tought my engine blew. heeh.

 

i found the best cupplings are from diesel truck mechanics...we bought a 3 foot peice of radiator hose...its that cloth covered cuppling material but THICK....so far its held over 35 psi with no leaks

 

Diesel shops kick ***! All of my piping was sourced from one:
https://honda-tech.com/zerothread?id=561345

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostCreep &raquo;</TD></TR><TR><TD CLASS="quote">i found the best cupplings are from diesel truck mechanics...we bought a 3 foot peice of radiator hose...its that cloth covered cuppling material but THICK....so far its held over 35 psi with no leaks </TD></TR></TABLE>

Damn @ 35 PSI... What size turbo were you running? I'm in awe

 

oops sorry for the late response..this damn limit on post sucks
it was on a built dsm...we kinda fudged up and crossed 2 vacume lines and the boost just WENT.... the needle on the gauge was bouncing off the pin b4 0...kinda dumb but the car didnt seem to mind..it was on a t-60...the boost will prob be set around the 25 psi mark for drag tho

 

thats boost creep like a ****.

 

w0w. 35 psi is some ****.

how much power is that on a dsm. like 600 or something

 

^
how does that BOV sound? If it's not too much trouble and you have the equiptment, would you mind making a recording of the sound?

 

NICE! What kind of piping material is that?? LOOKS GOOD!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FragSyndrome &raquo;</TD></TR><TR><TD CLASS="quote">
^
how does that BOV sound? If it's not too much trouble and you have the equiptment, would you mind making a recording of the sound?</TD></TR></TABLE>

Possibly a little later on this week. Its Steel piping I painted with cast blast, those are purosil bends from a kenworth.

 

actually no idea...goal is 500...but the closest dyno is in ct which is a good 3 hour drive...but we will make up soon...ill make a post so we can maybe get a lil g2g goin

 

cool sounds good..