1st time at the track (ep3), real bad humidity
Thread Starter
Joined: Jun 2003
Posts: 209
Likes: 0
From: NH, US
1st time at the track (ep3), real bad humidity
well i ran my ep3 for the first time tonight and the temperature was 83 degree's and the dew point was at 75, which is soooooo humid outside it feels like there's no air. my best run of the night goes as follows, nothing great but there's always next time.
RT... 575
60... 2.384
330.. 6.599
1/8... 10.151
mph.. 69.85
1000..13.202
1/4... 15.750
mph... 86.74
*** mods include *** no name ebay special hot air short ram intake and
greddy cat back exhaust.
*** maybe with a little better 60 ft and cooler weather i would have better times. my intake needs to go, i need a real one(aem or injen), there's always next time.**** not the slowest times but there's plenty of room for improvement.
RT... 575
60... 2.384
330.. 6.599
1/8... 10.151
mph.. 69.85
1000..13.202
1/4... 15.750
mph... 86.74
*** mods include *** no name ebay special hot air short ram intake and
greddy cat back exhaust.
*** maybe with a little better 60 ft and cooler weather i would have better times. my intake needs to go, i need a real one(aem or injen), there's always next time.**** not the slowest times but there's plenty of room for improvement.
Honda-Tech Member
Joined: Dec 2001
Posts: 547
Likes: 1
From: atlanta, ga, USA
good time. I ran a 15.73x with only an exhaust midpipe as far as mods went. That was with blad stock tires too. spare & jack was removed.
next time I hit the track, i'm hoping to be significantly below 15.5. i've got new tires, suspension on the way, intake on the way, motor mount inserts installed, heatshield gasket installed.
all that + a header and I should be in the 14's.
next time I hit the track, i'm hoping to be significantly below 15.5. i've got new tires, suspension on the way, intake on the way, motor mount inserts installed, heatshield gasket installed.
all that + a header and I should be in the 14's.
Joined: Jul 2003
Posts: 76
Likes: 0
From: Weatherford, Tx, USA
Re: 1st time at the track (ep3), real bad humidity (03 civic si hb)
Thats is realy not a bad run for your 1/8th 10.151 Thats actualy a decent run... But my EP3 is stock and a ran a 10.221 in the 1/8th. Without exhuast or intake!
In about 2 weeks all my saving money is going to these mods:
AEM CAI
NOLOGY Sprk plug wires
Nology Plugs
Greddy cat back Exhuast
Wings West 11pc body Kit
"Best mod of all"
Freinds used rims with low pro's...
In about 2 weeks all my saving money is going to these mods:
AEM CAI
NOLOGY Sprk plug wires
Nology Plugs
Greddy cat back Exhuast
Wings West 11pc body Kit
"Best mod of all"
Freinds used rims with low pro's...
B*a*n*n*e*d
Joined: Nov 2002
Posts: 3,581
Likes: 0
From: cali, 760, usa
Re: (chunky)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chunky »</TD></TR><TR><TD CLASS="quote">good time. I ran a 15.73x with only an exhaust midpipe as far as mods went. That was with blad stock tires too. spare & jack was removed.
next time I hit the track, i'm hoping to be significantly below 15.5. i've got new tires, suspension on the way, intake on the way, motor mount inserts installed, heatshield gasket installed.
all that + a header and I should be in the 14's.</TD></TR></TABLE> I highly doubt that
next time I hit the track, i'm hoping to be significantly below 15.5. i've got new tires, suspension on the way, intake on the way, motor mount inserts installed, heatshield gasket installed.
all that + a header and I should be in the 14's.</TD></TR></TABLE> I highly doubt that
Thread Starter
Joined: Jun 2003
Posts: 209
Likes: 0
From: NH, US
it'll take a little work to get into the 14's with a ep3 with bolt ons but keep plugging away at it. my friend has a ep with a aem intake,comptech exhaust and hondata and he posted a 15.3 and he had alful 60 ft times of 2.4 and 2.5. if we can lower his 60 ft times by .2 i think he could be very close.
Thread
Thread Starter
Forum
Replies
Last Post
