Well I put my CRV pulley on my JRSC R today and holly crap its insane fast..
anwyays...
I also tryed to install my 440RC injectors and hondata 2b with chipped p28 ecu...

I pluged it all up with a conversion harness obd2-obd1 and the car wont start...
I hooked up the push buton and the other cable wunning to the ECU but NOT the clutch cable?? is that why it wont work???
the hondata light wont come on and the car is just like dead.....

I bought the hondata used and im wondering if its broken if thats even possible??

Thanks
Tyler

 

anyone!

 

Is your car OBD2a or OBD2b. IT's possible that you may have the wrong harness adapter.

OBD2a has a space and OBD2b has all 3 plugs in a row.

 

did you use a resistor pack?

 

no resister pack!!!

and I have 4 pins for the data cable from hondata....

my car is a 99 OBD2 integra type R?? how do i check?

 

I have a space!!! on the stock ECU!

 

your car is obd2a, but did you get an obd2a adapter harness?

You may want to read this: http://hondata.com/techecuid.html

 

car will start up with/witout hondata blue box plugged in.. make sure ecu/harness are in good condition.

 

I said I had a gap so I have just OBD2 right?

 

yes obd2a
its probably the harness that is messed or the ecu is fried

 

yup!!! I tryed the hondata with the ECU on a 93 civic OBD1 and it works!!!

so my harness is FACKED!