I decided to take off my AEM spark plug wire cover, sand it, and paint it with something original on it. Its a GSR with a JR supercharger, so I wanted something pertinent to the blower. I was thinking something alon the lines of "Blow Me" (in big letters) and putting -Jackson Racing (in smaller letters) under it, like Im quoting JR. That or "Blow this". Anything along those lines. Gimme your opinions on what to write.
gmoore

BTW- I planned on painting the cover, letting it dry, masking the whole thing, and cutting out the words with an exacto, then painting it again, then I would peel the tape and bam, its done. Is that how you would do it?

 

wouldnt it get mad overspray, even if the letters were masked??.. also, blow me? thats ur call. hah.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GroundZer0 &raquo;</TD></TR><TR><TD CLASS="quote">wouldnt it get mad overspray, even if the letters were masked??.. also, blow me? thats ur call. hah. </TD></TR></TABLE>

Naw, not if I masked the whole piece, its not that big. Blower, Blow Me...... Just wanted to make sure you made the connection.... More opinions.
gmoore

 

'Blow me'... I'd say that's the best choice. Hilaaarious

 

LOL!!!!!!!! blow-this!! ;}

 

Anyone wanna second the Blow Me idea, any other thoughts?
gmoore

 

Blow Me!

 

The other option is to put my h-t/aim SN on there, tegunderpressure.
gmoore

 

blow this blow me something along those lines... good luck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegunderpressure &raquo;</TD></TR><TR><TD CLASS="quote">cutting out the words with an exacto</TD></TR></TABLE>

Don't do this. It could possibly stratch your cover. And yes you can see it. Do this. Goto graphics shop, get a sticker printed. Then instead of getting the inside, tell them you want the outside of "Blow Me" stick it on your cover and it will be ALOT better. More precise and no scratchs. The sticker is what, 7 bucks. do it that way

 

aight, lol i was confused there ... "blow me" sounds good for this!

 

I have a few friends telling me to do the tegunderpressure, they say its more creative and meaningful. IDK, I like both. Blow Me is alittle more ketchy, snappy, ya know. But tegunderpressure is more original. Any ideas on how to combine the two?
gmoore

 

OEM STOCK!

 

how about,

'i'm swollen'
'get blown'
'blow harder'
'blown good and propalike'
'm4d vT3k y0'

even better,

'i get blown more than the driver'

blah, i dunno i'm bored.

 

my pants are unzipped...

: waits patiently:

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by j.fuggi &raquo;</TD></TR><TR><TD CLASS="quote">'i get blown more than the driver'</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SPORT INJECTION &raquo;</TD></TR><TR><TD CLASS="quote">my pants are unzipped...

: waits patiently:</TD></TR></TABLE>

im scarred and confused now

 

I would say sell the AEM on the classifieds here on h-t, and have your way with a much cheaper, and easier to come by stock peice.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ransack &raquo;</TD></TR><TR><TD CLASS="quote">

im scarred and confused now</TD></TR></TABLE>
haha ....