84mm on a RS machine Sleeve?
Member
Joined: Oct 2002
Posts: 3,279
Likes: 0
From: Secret Tweaker Pad
Re: 84mm on a RS machine Sleeve? (TurboAce)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboAce »</TD></TR><TR><TD CLASS="quote">I was wondering if it was possible to run 84mm with turbo.</TD></TR></TABLE>
you shouldnt have a problem Arturbo is running 81.5 on his, but ive seen 84mm before. i think art is gonna do 84mm on another RS block though. anyway they are very clean installs and you shouldnt have a problem
you shouldnt have a problem Arturbo is running 81.5 on his, but ive seen 84mm before. i think art is gonna do 84mm on another RS block though. anyway they are very clean installs and you shouldnt have a problem
Honda-Tech Member
Joined: Aug 2002
Posts: 2,273
Likes: 0
From: Cincinnati, OH, USA
Re: 84mm on a RS machine Sleeve? (TurboAce)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboAce »</TD></TR><TR><TD CLASS="quote">I was wondering if it was possible to run 84mm with turbo.</TD></TR></TABLE>
yes but remember if you ever have any problems and want to rebore, depending on how bad the damage, you will sacrifice thickness of the sleeve. Im personally staying with standard bore on my sleeved block. Let the turbo make up for the power differences. Everyone has a different opinion though and there are many people on this board that run 84 mm and larger bores for turbo applications.
Thread
Thread Starter
Forum
Replies
Last Post
eg:R
Forced Induction
55
Dec 22, 2006 02:14 AM
