hey all, my font subrame is bent and needs replaced. The guy at the alignment shop said that the front passenger side knee is pushed in and back a little. You can see this because the pass. wheel sits towards the back of the wheelwell.

I've got a 89 parts hatchback and was wondering if the subframe is the same. I assume it is. How hard of a job is this? Does the motor need to be taken out?


There wouldnt happen to be any online help on how to do this would there?


thanks,
Joe

 

NAH, no online help/thread i know of but its pretty straight forward. the frt x member off the 89 hatch should be the same. they basically bolt in with two big bolts on the end and you have to unbolt the frt motor mount and unbolt the strut rods that go to the lower control arms.