Anobody tried this? Will it clear? The stock Euro rims are 6x15" ENKEI, Offset 50.

This is a picture of my rims...


I have read many posts about the NSX calipers and frontdiscs on ITRs, I think it sounds like an good upgrade - but before I go any further with this I need to know if I can use my stock Euro wheels.

Can u guys help me out?

 

If the UKDM calipers and rotors are the same as the USDM setup, then it should fit just fine.

 

nice snow tires .....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tsunami_zc &raquo;</TD></TR><TR><TD CLASS="quote">nice snow tires ..... </TD></TR></TABLE>

Hehe.. It's an old pic from january ... Have to use snow tires here in Norway

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by genuine &raquo;</TD></TR><TR><TD CLASS="quote">Anobody tried this? Will it clear? The stock Euro rims are 6x15" ENKEI, Offset 50.

I need to know if I can use my stock Euro wheels. </TD></TR></TABLE>

Anybody who has tried stock wheels and NSX brakes!?

I'm going to look at the NSX brakes, pads and rotors tomorrow, probably buy em - so any more useful info would be very helpful at this time! Thanks in advance!

 

assuming its the same as usdm, it will fit.
i have them on my car. you run a small washer, legend rotors, and it all bolts on.
btw, itr and nsx share the same brake pad.

 

genuine

Ive whored this picture enough but it answers your question. USDM ITR wheels

 

Migs: Thank you!

I've read your previous install-post also - thanks for the Info
Too bad the we-todd-did-pictures is down... But nice write-up anyways.
https://honda-tech.com/zerothread?id=239844