Since everyone is so scared to make an offer, I'm going to give prices:

$325 Spearco
$225 Fluidyne heat exchanger SOLD
$100 for everything else SOLD

All together its $550 shipped.
These prices are firm. Don't waste my time.



Spearco 2-252 assembly with 2" inlet, 2.5" outlet. I had to have it remodified because the turbo intake pipe was not accounted for when this was first made on me



two silicone hump couplings for the inlet and outlet


Jabsco water pump


1 gallon reservoir with several fittings and caps.



Fluidyne DB-30869 for a heat exchanger. Has modified fittings to use -6 hose ends.



An elbow with Greddy flange. All 304 SS except the actual flange which is steel. 45 degree elbow with bead rolled ends to keep couplings from blowing off. Works perfect for the intercooler in a Honda and many other cars.


Earl and Aeroquip hose ends, all the fittings needed. Also some 6 feet of brand new -6 Aeroquip Socketless hose (not pictured). All the hose and fittings were never used. Some are just installed, others never even touched.

Here is what it looks like hooked up to my CRX way back in the day.


Everything is in brand new condition except the reservoir. I paid over $1100 on this stuff (Fluidyne=$425, Spearco=$475...) and I know I'm not going to get close to that back, so I'm going to take offers on it. I will only part out if there is interest in all the parts.

I will accept trades towards the following:
-2.5" SS exhaust for 92-95 hatch
-JDM ITR header
-Hondata S100


Modified by Smoothy at 2:00 AM 7/7/2003


Modified by Smoothy at 11:53 PM 7/13/2003


Modified by Smoothy at 1:03 AM 9/2/2003

 

Bump

 

Up

 

Bump

 

Prices are up. No longer taking offers.

 

I think it is time to get crazy.. how well would this work on a DOHC turbo Vs. a hugh front mount..

I think i want this

 

How much for just the 45 degree bend with the greddy flange? What is the diameter of the pipe as well?


Modified by ITR#1437 at 3:48 PM 6/30/2003

 

Elbow goes with the intercooler.

 

Bump

 

Bump

 

Bump

 

 

I know that you dont want to part it out but ive been watching this thing for a while and nothing has happened. So is there any way that you could give me everything EXCEPT the heat exchenger? I dont want one that big....i think im going to get a smaller one to go in the wheel well. Thanks

Sean

 

Look at the first post. Its been edited with prices.

 

me want to look at this soon...we should meet up

 

sorry if i mislead you, but after doing some calcs out this intercooler wont be very effcient for my aplication...good luck selling it..if you dont get any buyers id be more than willing to buy the intake pipe, fuel cell, all the water piping and water pump...just let me know if you want to sell these few items..thanks anyways

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drumking15 &raquo;</TD></TR><TR><TD CLASS="quote">sorry if i mislead you, but after doing some calcs out this intercooler wont be very effcient for my aplication...good luck selling it..if you dont get any buyers id be more than willing to buy the intake pipe, fuel cell, all the water piping and water pump...just let me know if you want to sell these few items..thanks anyways</TD></TR></TABLE>

I've been willing to seperate. No one is willing to pay.

 

alright mark me down for the extra accesories...pump and fuel cell for the hundred bucks...i want them asap!...id even be willing to give ya some more for the pipe w/ the flange attached...let me know....ill pm you my cell #

 

 

Bump

 

 

Bump