My Custom Turbo kit:


Garrett t3/t04e- 57mm trim .63 A/R Stage III wheel
Tial 35mm Wastegate (7psi spring)<FONT COLOR="red">SOLD!</FONT>
PWR Intercooler- Core size 24x8x3.5+ 3in endtanks (over 30inches w/ endtanks.... its HUGE). 2.5 inlet/outlet
MaxRev Exhaust Manifold
MaxRev 2.5in Downpipe with Flex pipe
Action 2MD (6 puck-unsprung) clutch kit
GM 3-Bar MAP Sensor (for use with Hondata)<FONT COLOR="red">SOLD!</FONT>
Turbo-XS RFL BOV
Hondata s200 (w/ boost)<FONT COLOR="red">SOLD!</FONT>
CPR 550cc Saturated injectors
oil return / feed line kit (from Stan "Flamenco-T")<FONT COLOR="red">SOLD!</FONT>
AEM Fuel Rail <FONT COLOR="red">SOLD!</FONT>
AEM Fuel Pressure Regulator
p75 OBD-I LS ECU <FONT COLOR="red">SOLD!</FONT>
OBDII-&gt;OBD-I Conversion harness
Custom Mandrel bent piping 2.25in piping with a 2.5in charge pipe. (charge pipe was JetHot coated)-bought off- <u>94TealGSR</u> Sorry about the mixup <FONT COLOR="red">SOLD!</FONT>
Walbro 255lph HP intank fuel pump
CPR OBDII-&gt;OBDI injector clips
Pre-tapped b18b oilpan w/ a -10AN fitting


EVERYTHING IS BRAND NEW IN THE BOX!

Id like to sell it as a kit for right now, but will consider parting later.

E-mail or PM me for questions and the price.

Thanks,

-Will
integra707@aol.com


Modified by integra707 at 9:24 PM 6/11/2003


Modified by integra707 at 12:39 PM 6/17/2003


Modified by integra707 at 2:14 PM 6/17/2003


Modified by integra707 at 4:32 PM 6/17/2003


Modified by integra707 at 1:52 PM 6/24/2003


Modified by integra707 at 12:25 PM 6/25/2003


Modified by integra707 at 10:42 AM 7/3/2003

 

Price? Pictures?

Im local.

 

I would buy it, if you take payments.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MwGSR &raquo;</TD></TR><TR><TD CLASS="quote">Price? Pictures?

Im local.</TD></TR></TABLE>
Everything is brand new in the box... but if you want pictures, just let me know what you want pictures of. Im borrowing my friends camera today, and should be able to get them up after work. Check PM for price.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">I would buy it, if you take payments.</TD></TR></TABLE>

Sorry, need the money now
I gots to get my learn on.

-Will

 

IM me your price...nice set-up!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doughboy247 &raquo;</TD></TR><TR><TD CLASS="quote">IM me your price...nice set-up!</TD></TR></TABLE>
And youuuuuuuuuu have PM!

 

if you part I might be interested in the wastegate and BOV

 

I would be interested in the wastegate, and fuel pump, hondata and conversion harness if the price is right

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integra707 &raquo;</TD></TR><TR><TD CLASS="quote">bought off- Teal94GSR.</TD></TR></TABLE>

AHEM!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94TealGSR &raquo;</TD></TR><TR><TD CLASS="quote">

AHEM! </TD></TR></TABLE>
Sorry about that...
CORRECTION!!!! 94TealGSR.... regardless, its good stuff.

Just an update: I have someon local coming to look at the kit within the week. If he backs out, Ill begin parting it out. Just post here what you are looking for, and Ill let you know if the kit is sold or not.

Thanks everyone....
-Will

 

Up for the morning people.

 

Very nice setup

interested in PWR Intercooler if u part out

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by int3gra &raquo;</TD></TR><TR><TD CLASS="quote">Very nice setup

interested in PWR Intercooler if u part out </TD></TR></TABLE>

Thanks man, I appreciate it... If the full kit doesn't sell this weekend, Ill let you know about the intercooler.

 

a bump and a vouch for a fellow local ht member Sucks to see it go, I really wanted to see your teg boostin But priorities first

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AztecEJ &raquo;</TD></TR><TR><TD CLASS="quote">a bump and a vouch for a fellow local ht member Sucks to see it go, I really wanted to see your teg boostin But priorities first </TD></TR></TABLE>
Thanks alot ... I still be doin the car thing... I think im goin to pick up a s13 and swap it. Its cheap, so I can afford boost AND school.

 

Someone buy my kit, so I can afford......


I want to learn to read!

 

pics

 

I'm VERY interested in these:

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">
Garrett t3/t04e- 57mm trim .63 A/R Stage III wheel
Tial 35mm Wastegate (7psi spring)
PWR Intercooler- Core size 24x8x3.5+ 3in endtanks (over 30inches w/ endtanks.... its HUGE). 2.5 inlet/outlet
MaxRev Exhaust Manifold
MaxRev 2.5in Downpipe with Flex pipe
Turbo-XS RFL BOV
oil return / feed line kit (from Stan "Flamenco-T")
Custom Mandrel bent piping 2.25in piping with a 2.5in charge pipe. (charge pipe was JetHot coated)
Pre-tapped b18b oilpan w/ a -10AN fitting
</TD></TR></TABLE>

if you're willing to ship to Canada... IM me for prices?

Thanks

*edit: does B18b oilpan fit B16? prolly does but just to make sure..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hoya_10fintec &raquo;</TD></TR><TR><TD CLASS="quote">I'm VERY interested in these:

if you're willing to ship to Canada... IM me for prices?

Thanks

*edit: does B18b oilpan fit B16? prolly does but just to make sure..</TD></TR></TABLE>

I have a couple local people coming to look this weekend. Id rather not ship to Canada, because I was under the impression its relatively expensive. And the b18b oilpan won't work for your b16.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">pics</TD></TR></TABLE>
I didn't take pics, because everything is brand new.... and I don't own a digital camera . If the local people interested don't buy it, Ill borrow a camera and take some pics.

 

I'm interested in the turbo, but more in the charge pipes and TIAL WG. PLease email me a price: bryanjf16@aol.com

Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IntegraFanatic &raquo;</TD></TR><TR><TD CLASS="quote">I'm interested in the turbo, but more in the charge pipes and TIAL WG. PLease email me a price: bryanjf16@aol.com

Thanks</TD></TR></TABLE>

I have a possible local buyer for the kit coming this weekend.
So, the sale of the kit is *pending* over the weekend.

If he doesn't get it, Ill start parting.... and Ill get back to everyone asking about parts as soon as possible.

 

Ive been getting alot of PMs about just parts.

If you are interested in just parts please send me an e-mail at: integra707@aol.com .... Just so IF I decide to part it, Ill have all of the requests in front of me.

Thanks

 

DIBS!!! on OBD1 LS ECU

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OnePointFive &raquo;</TD></TR><TR><TD CLASS="quote">DIBS!!! on OBD1 LS ECU </TD></TR></TABLE>
LOL, no problem Ricky... If it isn't sold with the kit its alllllll yours bro.

 

Damn hate to see you get out Will.. I sent you a IM..