First off, I need Honda OEM bearings. I remember that there's someone on here that sells them.

Here's my situation: I got ACL standard bearings. I'm putting LS rods into a D16. The LS rods are stamped '2' but my Y8 rods were '3' (not sure if that makes a diff.) The stampings for the rod are BBAB.

Well, the clearances with the ACL bearings are at or beyond the service limit. Since the ACL are supposedly like OEM GREEN bearings, should I try YELLOW or BROWN OEM bearings next?

Thanks

 

http://www.slhondaparts.com/

 

contact len on here he has cheap prices.

he has a thread in the best buys section called Baranco auto parts