mini-me, did a search and this wasnt in the archives
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 1,267
Likes: 0
From: Land of Panduckys, Melbourne, FL, USA
mini-me, did a search and this wasnt in the archives
what do i need to do to the block, i know about the entire bolt on parts, but i remember there is something to plug up or something on the A6 block. someone please point me to a site or just tell me thanks
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 1,267
Likes: 0
From: Land of Panduckys, Melbourne, FL, USA
Re: mini-me, did a search and this wasnt in the archives (altoid)
and that is on the block, towards the rear correct>
also just wondering about what avg 1/4 times are and dyno results, i have seen a few and they have been around 120-130hp and 110-120tq at wheels
also just wondering about what avg 1/4 times are and dyno results, i have seen a few and they have been around 120-130hp and 110-120tq at wheels
Honda-Tech Member
Joined: Sep 2002
Posts: 1,518
Likes: 0
From: VA
Re: mini-me, did a search and this wasnt in the archives (Iceycrx)
the oil control jet is on the block deck, towards the intake manifold side on an a6. are you talking about the oil feed line for the vtec soleniod? that is located on the back of the block above the oil filter, you need to T off the oil sending unit.
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 1,267
Likes: 0
From: Land of Panduckys, Melbourne, FL, USA
Re: mini-me, did a search and this wasnt in the archives (kyle h.)
T off? Im just wondering, I know I had to removed the oil jet....so I also have to add a line to the vtec solenoid? Anything else? I am now starting to hear differant things to do this swap, is there a set site or anything to do this swap?
Thread
Thread Starter
Forum
Replies
Last Post
Projekt_2nr
Honda Civic / Del Sol (1992 - 2000)
6
Feb 13, 2007 12:34 AM
bagg248
Honda CRX / EF Civic (1988 - 1991)
2
Apr 21, 2004 07:12 PM