Valve Nut
Honda-Tech Member
Joined: Aug 2002
Posts: 4,638
Likes: 1
From: New York
Re: Valve Nut (eg_type_r93)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg_type_r93 »</TD></TR><TR><TD CLASS="quote">12mm </TD></TR></TABLE>
Honda-Tech Member
Joined: Jan 2003
Posts: 3,319
Likes: 2
From: some where in a locked cage
Re: Valve Nut (fe519)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fe519 »</TD></TR><TR><TD CLASS="quote">just a quickie question... I got a 93 Integra Ls, can someone just tell me the nut size for the valve cause I'm thinking about adjusting it... thanks </TD></TR></TABLE>
its a 10mm
the specs are
5 in
6 ex
on the LS
its a 10mm
the specs are
5 in
6 ex
on the LS
Trending Topics
Member
Joined: Apr 2002
Posts: 3,416
Likes: 0
From: Formerly pdcdragon, CA, US
Re: Valve Nut (NateTEG95)
i'm pretty sure teh b18A's would be the same as the b18b's in which case the nut size is a 12mm.
EDIT: oh and if its ur first time doin a valve adjustment, then feel free to go to my site linked in my sig and check out the diy section. I did a write up for the b18b1 and have plenty of pics and it should be damn similar for the 93 LS, but specs should be looked up for ur specific motor.
Modified by pdcdragon at 3:54 PM 6/3/2003
EDIT: oh and if its ur first time doin a valve adjustment, then feel free to go to my site linked in my sig and check out the diy section. I did a write up for the b18b1 and have plenty of pics and it should be damn similar for the 93 LS, but specs should be looked up for ur specific motor.
Modified by pdcdragon at 3:54 PM 6/3/2003
Thread
Thread Starter
Forum
Replies
Last Post
