I've had a few people express interest in this. I know a lot of you need these for Uberchips, Hondatas, whatever.

Here's the deal. If you buy the burner from Batronix...

$34.95 for the DIY unassembled kit.

OR

$62.95 for the assembled burner.

In addition to this, you also need a ZIF socket, which is an additional $7.95 (unless you want to be using a chip puller all the time).

You also need a power supply. I got mine from Radio Shack and it was over $20.00!

Figure shipping to be $10-15.

Your cost is going to range between $52 and $80 dollars after shipping depending on which package you buy, plus you have to buy the power adapter and software.

-----------------------------------

Now, I can probably sell these for about $80 assembled, and with a power supply.

I will also use a different power connector. The problem with the Batronix is that it comes with a power connector made to accept bare wires. Connecting the power like this makes it very easy to get the polarity reversed, which fries the buner (I know from experience ).

I am going to use barrell connectors like every other board uses to prevent this issue

All this leaves you to buy is the software. The cool thing about that is you can download the software from the Batronix website and register online ($25) so you don't have to pay shipping or have to wait for it to arrive.


To work this deal, I have to buy quite a few of the boards and even more of the components needed to assmble the burner, so what I would like to do is see if anybody wants to "pre-order" a few. This is just to keep me from jumping in and getting stuck with a bunch of these things.

If you are interested, even if you have contacted me already, send me an email

here.

If these is enough interest, I will ask that you to go ahead and place your order (you can pay via Paypal for this deal) and I will order the parts. Once they arrive I will assmble the burners and ship them out within a couple of days. Depedning on the time it takes for the parts to arrive (mainly the circuit boards since they are coming from Germany) turnaround time should be pretty quick, hopefully less than 2 weeks.

 

good deal. finished putting mine together this last week, just need to burn my first chip tonight. you have IM about something else mr. stupidfast.

 

(( free bump ))

... great deal!... i wish i was already in the market for one of these but i gotta finish the engine rebuild first... anyways, hopefully there will be more interest in this so that people like me can get in on this later...

 

Hey Chris, you got mail.

 

Ok boys and girls, it seems that we have sufficient interested. I've setup a link where you can pre-pay via Paypal here:

http://www.stupidfast.com/products/burner.html

I will order everything after the first few people pay and we'll get this deal going

 

so if i get this unit to burn the data, all i need left is the datalog and ROM editor to edit the hondata maps myself right?

 

Awesome price, sent you an IM about a question.

 

If you're using Hondata, you'll need Hondata's ROM editor and the Prog-Studio program from Batronix along with this burner.

 

free bump for a great friend . I'll be getting it soon if i don't he'll probably beat me up....j/k

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PseudoSilvia &raquo;</TD></TR><TR><TD CLASS="quote">Ok boys and girls, it seems that we have sufficient interested. I've setup a link where you can pre-pay via Paypal here:

http://www.stupidfast.com/products/burner.html

I will order everything after the first few people pay and we'll get this deal going </TD></TR></TABLE>

Sonofabitch, it figures you come out with this 2 WEEKS after I get my Batronix!

Oh well, bump for a good price from a good seller.

- Slater

 

Will the Light version of the software work?

 

Hehe, well that sucks for me too Slater

Also, I believe the lite version will work, I may buy a copy just to see so we can be sure.

 

Sooo.....you guys change your minds or what? Nobody has ordered.

I already picked up a bunch of stuff for these, including extra power adapters. If anybody that already has the burner needs a power supply, contact me!

 

i still want mine money order will go out tomm or friday thx man

 

Well, I just got my batronix kit today, oh well. I am interested in getting my eeprom, ziff socket and installation kit that I ordered from you a while back, though. has that gone out yet?

In any case, what is the difference between the power supply you have and the one available at radio shack? Price?

 

will this one burn the OBD0 chips also?

 

Are these still up for sale?

 

when i get my software ill get the burner...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">will this one burn the OBD0 chips also?</TD></TR></TABLE>

 

im pretty sure he's not selling the kits anymore

 

i ordered and paid mine 2 and a half weeks ago.. any word on shipping man?
did anyone order anything from this guy and get anything?

if u cant get it just give me my money back.

 

Patience. It'll come. He's assembling them now.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sirex &raquo;</TD></TR><TR><TD CLASS="quote">i ordered and paid mine 2 and a half weeks ago.. any word on shipping man?
did anyone order anything from this guy and get anything?

if u cant get it just give me my money back. </TD></TR></TABLE>

Chill, Ive ordered from him before.
Hes a good guy.

 

OBD0 chip = OBD1 chip, just different program burned to it.

Batronix Eprommer 3.x is a great unit. They burn far more chips than an automotive hobbyist will ever need.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sirex &raquo;</TD></TR><TR><TD CLASS="quote">i ordered and paid mine 2 and a half weeks ago.. any word on shipping man?
did anyone order anything from this guy and get anything?

if u cant get it just give me my money back. </TD></TR></TABLE>

I IM'd you this morning, and every other time I have been able to get onto Honda-Tech (which admittedly is not every day any more). I've been trying to keep my patience with you, but I guess you have the patience of a 5 year old. A prime ******* example of why I didn't want to do this crap anymore.

I TOLD YOU FROM THE GET-GO....I would need to wait until a few people had ordered, which I did. I ordered the parts. They trickled in. There were some diodes missing from one of my orders, which kind of makes the things not work if they are not there.

I am trying to source some locally so that I can lose even more money and get your stuff shipped out. It's really so I can keep Jeff happy

I said in my post the lead time would be approx two weeks, give or take, depending on the time it took for me to get the parts. If you needed it in a tighter time frame, you should have had one overnighted from Batronix.com for twice the price.

When things are out of my control, all I can do is do my best to make the situation work.