What's up... I did a search but couldn't find much help...

In order to install a new clutch at home, what are teh necessary steps? Is it just taking the front dirveshafts off, and unbolting the tranny from the bottom, then lowering the tranny out? Any tips or suggestions?? Thanks

Btw, if it matters, its a 95 RS.

 

Basically. I think it'd be best if you could get your hands on a HELMs manual or something that has detailed pics of it, and has all the torque settings.

That or take it somewhere. Dropping a tranny and installing a clutch = not fun (IMO).

My friend did his own. Came out just fine 7 hours later, but he was sooo ******* dirty his g/f made him burn his clothes.

I say take that **** to a shop and pay the $250 bux to get it installed.

 

I did my own clutch/flywheel last summer. It's not that bad. However, a HELMS manual is a must -- and don't cheap out on one of those Chilton/Haynes books.

 

i just did mine a couple months ago, you got IM

 

try in the tech forum as well.. .since all bseries trannies will pretty much be the same deal, you are bound to get plenty of input there. good luck!

 

Thanks a lot for all the help guys... and thanks for teh IM gumby... if I have any trouble when the time comes in the next 2 weeks (After car gets out of the shop) I'll let you guys know... thanks...

Oh btw, I downloaded the HELMS manual off of the net... A buddy found it and posted a link on TorontoIntegras... I never even though about checking it.... If anyone needs the HELMS on their computer just let me know... Or email me at Jay_69_@hotmail.com

 

id say it would be easier to take the whole engine out so you have everything in front of you instead of trying to get to all those bolts while its in the car.

 

http://www.c-speedracing.com/h...h.php

 

http://www.integraxsi.orcon.net.nz/clutch

 

Hey thanks a lot for the help guys